@jaredbusch said in Remmina - using profiles causes application to crash - Fedora 28 Workstation:

@dustinb3403 said in Remmina - using profiles causes application to crash - Fedora 28 Workstation:

@jaredbusch said in Remmina - using profiles causes application to crash - Fedora 28 Workstation:

Thanks for the fast reply, the issue is the color setting were set to low by default. Setting it to 16 bit corrected the issue.

So the crash was connecting, not the profile creation?

Correct.

Is Remmina ceashing when RDP to older servers like Server 2008 R2? That’s the only server giving me issues with Remmina. Try freerdp or rdesktop through command line and see if you have a better experience.

@stacksofplates said in Remmina: Fedora to Fedora issue.:

@bigbear said in Remmina: Fedora to Fedora issue.:

@gjacobse said in Remmina: Fedora to Fedora issue.:

@bigbear said in Remmina: Fedora to Fedora issue.:

@gjacobse said in Remmina: Fedora to Fedora issue.:

@bigbear said in Remmina: Fedora to Fedora issue.:

@gjacobse said in Remmina: Fedora to Fedora issue.:

I know this was discussed in the past, but I am not able to find the thread on it.

Windows to Fedora using RDP is fine,.. it's Fedora to Fedora using Remmina that I get the issue.

0_1530814284753_Remmina RDP Error.png

Thoughts?

Is this a Type or are you saying that you RDP from a Windows box to a remote Fedora box?

At that time, I was going from Fedora to Fedora

But you are using RDP protocol and not VNC?

Sadly I don't remember currently. And for the moment, I am mainly all Windows again due to some hardware issues. Once things getting settled - oh sometime about 2025 - I will have another go at it.

I was just reading the part where you accessed a Linux PC via RDP from your Windows box, and wanting to make sure I read that right. I am assuming you meant that you accessed a WIndows BOX for Remmina RDP from your Linux box.

No you can RDP into Linux. xRDP will either set up a full X session or use behind in ND the scenes to create a session.

Wow that was terrible. It was supposed to say "or use vnc behind the scenes"

@francesco-provino said in Linux: History:

@stacksofplates said in Linux: History:

you can just do

gedit ~/.bash_history

or if you like the cli

cat ~/.bash_history

Obv only Bash if that's what you're using.

Why conCATenate? Just use LESS.

You can do either or any combination. Mostly just pointing you you don't need the gui.

@scottalanmiller said in Fedora: Skype for Linux:

Does the installer allow for video? Any benefit over the web page?

Seems to - though I've not had any calls to test it.... if you wish,. call away to test. But it did pick up the Jabra Headset and the Logictech Camera.

@matteo-nunziati f**k I will never learn how to write on a damn smartphone

@black3dynamite said in Remote Desktop to Fedora 28?:

@dafyre said in Remote Desktop to Fedora 28?:

@black3dynamite said in Remote Desktop to Fedora 28?:

@dafyre said in Remote Desktop to Fedora 28?:

@fuznutz04 said in Remote Desktop to Fedora 28?:

@dafyre I didn't ever get back to needing this until now. How were you able to achieve this? I use Fedora 28 and the Cinnamon desktop.

Sadly, no, I haven't. From what I can tell, Fedora 28 (probably 29 too) use Wayland by default. I haven't found a way to get it working yet. I tried switching the Login Screen to use X first, but even that didn't help.

Have you tried disabling Wayland instead?

I hadn't thought about that. I'll have to do a fresh install and see how that's done, unless there's a working VNC Server package in Fedora 29...

Just edit /etc/gdm/custom.conf and uncomment WaylandEnable=false and then restart. You will have only two options GNOME and GNOME Classic.

That gets me one step closer. I can get XRDP to connect to the local VNC server, but the user has to log in (locally) first... :face_with_cold_sweat:

@xylems said in Errors Building Guacamole Server on Fedora 28:

@travisdh1 step-by-step guide for the entire guacamole installation?

Definitely make it two parts, preferably two posts. Post one for setting up Guac. Post 2 for setting up LDAP.

Something like this format https://mangolassi.it/topic/16471/install-bookstack-on-fedora-27
Or this: https://mangolassi.it/topic/16380/install-nextcloud-13-0-0-on-fedora-27

I got the PPD to work, gods that is annoying (Canon) and their crappy driver support. .

@jaredbusch said in KVM under fedora workstation - improve performance:

I have zero issues using virt manager viewr for my local guest VM

for remote, I would use RDP or ScreenConnect.

Nothing wrong with it when needed, but it doesn't need to perform well for its role.

@emad-r said in CentOS 7 - Why Did [Almost] Everyone Switch to Fedora?:

the other guy who is knowledgeable but not as nice as Scott

Hahahahahahahahahahh

@obsolesce said in Salt-Master Errors Fedora 28:

@scottalanmiller said in Salt-Master Errors Fedora 28:

Or closer to working, at least.

Something still wrong with it? F28-only?

Yeah, it runs better now, but still throws errors later.

@irj said in New to Fedora, What should I configure out of the box?:

I got lync working. So I am 0% dependent on Windows for my job functions 🙂

Awesome

This one seems to make more sense since its installed from a snap like what Ubuntu does by default.

https://www.cyberciti.biz/faq/how-to-install-setup-lxd-on-fedora-linux/

@jmoore said in Am I Running Wayland or Xorg X11?:

@scottalanmiller Ok thanks and interesting. I will have to research them some.

Was going to ask the same thing lol

@black3dynamite said in Fedora with ScreenConnect:

I believe GDM is running under Wayland when using Fedora Gnome. Might have better success using Fedora XFCE for a jump box.

We didn't have good results with that either, problems with menus in browsers.

@jaredbusch said in Interesting Cinnamon themes for Fedora:

The default dark theme is getting annoying, so I am lookint at other themes and found this.

Confirmed annoying.

@momurda said in Samba Issues:

@obsolesce Did you change your username?

The old one was... obsolete.

@black3dynamite said in PowerShell Failing to Run on Fedora 28:

Is that only a Fedora issue?

No, definitely not isolated to Fedora. It's any distro, or any that are set up, in a way that PS doesn't like in terms of the xterm environmental. So most, I would assume, are affected, but all have a fix. It's a PS bug, and decently easy to work around.

@black3dynamite said in Create UEFI bootable USB from Fedora:

Try using WoeUSB via command line. Here's what I did with my USB drive.

sudo umount /dev/sdb1 sudo woeusb --tgt-fs NTFS --device Win10_1903_V1_English_x64.iso /dev/sdb

After running the command.

WoeUSB v3.2.12 ============================== Mounting source filesystem... Wiping all existing partition table and filesystem signatures in /dev/sdb... /dev/sdb: 2 bytes were erased at offset 0x000001fe (dos): 55 aa /dev/sdb: calling ioctl to re-read partition table: Success Ensure that /dev/sdb is really wiped... Creating new partition table on /dev/sdb... Creating target partition... Making system realize that partition table has changed... Wait 3 seconds for block device nodes to populate... Cluster size has been automatically set to 4096 bytes. Creating NTFS volume structures. mkntfs completed successfully. Have a nice day. --2019-06-05 19:28:36-- https://github.com/pbatard/rufus/raw/master/res/uefi/uefi-ntfs.img Resolving github.com (github.com)... 192.30.253.113 Connecting to github.com (github.com)|192.30.253.113|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/pbatard/rufus/master/res/uefi/uefi-ntfs.img [following] --2019-06-05 19:28:37-- https://raw.githubusercontent.com/pbatard/rufus/master/res/uefi/uefi-ntfs.img Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 524288 (512K) [application/octet-stream] Saving to: ‘/tmp/WoeUSB.JXhyoC.tempdir/uefi-ntfs.img’ uefi-ntfs.img 100%[===================>] 512.00K 2.70MB/s in 0.2s 2019-06-05 19:28:37 (2.70 MB/s) - ‘/tmp/WoeUSB.JXhyoC.tempdir/uefi-ntfs.img’ saved [524288/524288] 1024+0 records in 1024+0 records out 524288 bytes (524 kB, 512 KiB) copied, 0.293463 s, 1.8 MB/s Mounting target filesystem... Applying workaround to prevent 64-bit systems with big primary memory from being unresponsive during copying files. Copying files from source media... 1% Installing GRUB bootloader for legacy PC booting support... Installing for i386-pc platform. Installation finished. No error reported. Installing custom GRUB config for legacy PC booting... Resetting workaround to prevent 64-bit systems with big primary memory from being unresponsive during copying files. Unmounting and removing "/media/woeusb_source_1559784507_8150"... Unmounting and removing "/media/woeusb_target_1559784507_8150"... You may now safely detach the target device Done :) The target device should be bootable now

Just did this today from CLI. Worked perfectly.