How to install the Ubiquiti UniFi Controller on Debian 9.1

bigbear

Second LAN port, typo...

I was using the lan/wan as a second port and once provisioning USG decided it would be disabled.

hobbit666

When I run this command

apt-key adv --keyserver keyserver.ubuntu.com --recv 06E85760C0A52C50

I get this message:-

Executing: /tmp/apt-key-gpghome.8Iu0CA5dVp/gpg.1.sh --keyserver keyserver.ubuntu.com --recv 06E85760C0A52C50
gpg: keyserver receive failed: No keyserver available

hobbit666

Maybe should add installing on Debian9 (followed Jared's guide) on internal VM internally.

JaredBusch

@hobbit666 said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

Maybe should add installing on Debian9 (followed Jared's guide) on internal VM internally.

Did you run this as root or use sudo?

hobbit666

@jaredbusch ur yes lol.

hobbit666

@jaredbusch
SSH into my server via putty. Logged in as the user unifi01 when at the prompt did the

su -

ran all the commands above but had the error on the key import.

I'll try running direct on the VM console.

hobbit666

Still the same on console

JaredBusch

@hobbit666 said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

Still the same on console

Very odd as it works jsut fine for me even with sudo.

jbusch@deb9-demo:~$ sudo apt-key adv --keyserver keyserver.ubuntu.com --recv 06E85760C0A52C50
[sudo] password for jbusch: 
Executing: /tmp/apt-key-gpghome.DyMKqzXPlf/gpg.1.sh --keyserver keyserver.ubuntu.com --recv 06E85760C0A52C50
gpg: key 06E85760C0A52C50: "UniFi Developers <[email protected]>" not changed
gpg: Total number processed: 1
gpg:              unchanged: 1
jbusch@deb9-demo:~$

JaredBusch

@hobbit666 let me blow this system back to snapshot and do it again.

Side note: I said to su - to root because you cannot cat the apt list file from sudo and there are so few commands to set this up. Technically it can all be done from your user with sudo if you use nano or vi to create the list file.

hobbit666

SOLVED!!!!
Changed the router, firewall must of been blocking.

CCWTech

When using Vultr is it just https://unifi.hostname.vultr.com:8443 ?

dbeato

@ccwtech said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

When using Vultr is it just https:\unifi.hostname.vultr.com:8443 ?

If you have a vultr hostname then yes, otherwise you create a DNS record pointing to your Vultr WAN IP.

CCWTech

Ok, in the meantime I'm trying https://unifi.xx.xx.xx.xx:8443 and not getting anything. Shouldn't that work?

dbeato

@ccwtech said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

Ok, in the meantime I'm trying https://unifi.xx.xx.xx.xx:8443 and not getting anything. Shouldn't that work?

It should as long as Unifi service is started, ports listening internally and Vultr fireewall allowing it.

dbeato

@ccwtech said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

Ok, in the meantime I'm trying https://unifi.xx.xx.xx.xx:8443 and not getting anything. Shouldn't that work?

@ccwtech said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

Ok, in the meantime I'm trying https://unifi.xx.xx.xx.xx:8443 and not getting anything. Shouldn't that work?

What is the result of the following:

Service unifi status

CCWTech

@dbeato

root@UBNT_Controller:~# service unifi status
● unifi.service - unifi
Loaded: loaded (/lib/systemd/system/unifi.service; enabled; vendor preset: en
Active: active (running) since Sun 2017-12-17 19:56:30 UTC; 1h 45min ago
Main PID: 15614 (jsvc)
CGroup: /system.slice/unifi.service
├─15614 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15616 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15617 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15628 /usr/lib/jvm/java-8-openjdk-amd64/jre/bin/java -Xmx1024M -XX:
└─16476 bin/mongod --dbpath /usr/lib/unifi/data/db --port 27117 --uni

Dec 17 19:56:29 UBNT_Controller systemd[1]: Starting unifi...
Dec 17 19:56:30 UBNT_Controller unifi.init[15558]: Starting Ubiquiti UniFi Contr
Dec 17 19:56:30 UBNT_Controller systemd[1]: Started unifi.

dbeato

@ccwtech said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

@dbeato

root@UBNT_Controller:~# service unifi status
● unifi.service - unifi
Loaded: loaded (/lib/systemd/system/unifi.service; enabled; vendor preset: en
Active: active (running) since Sun 2017-12-17 19:56:30 UTC; 1h 45min ago
Main PID: 15614 (jsvc)
CGroup: /system.slice/unifi.service
├─15614 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15616 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15617 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15628 /usr/lib/jvm/java-8-openjdk-amd64/jre/bin/java -Xmx1024M -XX:
└─16476 bin/mongod --dbpath /usr/lib/unifi/data/db --port 27117 --uni

Dec 17 19:56:29 UBNT_Controller systemd[1]: Starting unifi...
Dec 17 19:56:30 UBNT_Controller unifi.init[15558]: Starting Ubiquiti UniFi Control
Dec 17 19:56:30 UBNT_Controller systemd[1]: Started unifi.

Wat about this now
netstat -ano | grep listening

dbeato

@ccwtech said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

@dbeato

root@UBNT_Controller:~# service unifi status
● unifi.service - unifi
Loaded: loaded (/lib/systemd/system/unifi.service; enabled; vendor preset: en
Active: active (running) since Sun 2017-12-17 19:56:30 UTC; 1h 45min ago
Main PID: 15614 (jsvc)
CGroup: /system.slice/unifi.service
├─15614 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15616 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15617 unifi -cwd /usr/lib/unifi -home /usr/lib/jvm/java-8-openjdk-a
├─15628 /usr/lib/jvm/java-8-openjdk-amd64/jre/bin/java -Xmx1024M -XX:
└─16476 bin/mongod --dbpath /usr/lib/unifi/data/db --port 27117 --uni

Dec 17 19:56:29 UBNT_Controller systemd[1]: Starting unifi...
Dec 17 19:56:30 UBNT_Controller unifi.init[15558]: Starting Ubiquiti UniFi Contr
Dec 17 19:56:30 UBNT_Controller systemd[1]: Started unifi.

Also it looks like it is running.

CCWTech

@dbeato said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

netstat -ano | grep listening

No output from that command.

dbeato

@ccwtech said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

@dbeato said in How to install the Ubiquiti UniFi Controller on Debian 9.1:

netstat -ano | grep listening

No output from that command.
Sorry it should be


netstat  -plnt