What Are You Doing Right Now
-
And a fourth one! I have two currently on chargers.
-
-
Working on my FreePBX and VyOS vms.
-
@eddiejennings said in What Are You Doing Right Now:
Working on my FreePBX and VyOS vms.
Give me an hour to get a few drinks in me then ask away!
-
Just sat down at a local sports bar in my hometown with a friend.
-
@jaredbusch said in What Are You Doing Right Now:
@eddiejennings said in What Are You Doing Right Now:
Working on my FreePBX and VyOS vms.
Give me an hour to get a few drinks in me then ask away!
Ha! :smiling_face: This is a little different than using FreePBX on a Vultr instance. My current experiment is this:
- NAT traffic to the pbx (not ports configured on this)
- Allow only necessary ports in with my WAN_IN firewall rule set
- Let the responsive firewall do it's thing.
#2 is probably not necessary, as I could just let any traffic to the pbx through and just rely on the responsive firewall, but this is an experiment; thus, a chance to see if I can configure it like this.
-
Wife and kids are out shopping for a soroban (Japanese Abacus) for my 8yo.
https://en.wikipedia.org/wiki/Soroban
She got a half sized one a while back and loves using it.
-
@eddiejennings said in What Are You Doing Right Now:
@jaredbusch said in What Are You Doing Right Now:
@eddiejennings said in What Are You Doing Right Now:
Working on my FreePBX and VyOS vms.
Give me an hour to get a few drinks in me then ask away!
Ha! :smiling_face: This is a little different than using FreePBX on a Vultr instance. My current experiment is this:
- NAT traffic to the pbx (not ports configured on this)
- Allow only necessary ports in with my WAN_IN firewall rule set
- Let the responsive firewall do it's thing.
#2 is probably not necessary, as I could just let any traffic to the pbx through and just rely on the responsive firewall, but this is an experiment; thus, a chance to see if I can configure it like this.
You need 5060/5061 for SIP and SIP with TLS.
RTP is 10000-20000 by default. You can narrow that in FreePBX.
-
Ordering pizza for dinner again.
-
Drinkiing.
-
@jaredbusch said in What Are You Doing Right Now:
@eddiejennings said in What Are You Doing Right Now:
@jaredbusch said in What Are You Doing Right Now:
@eddiejennings said in What Are You Doing Right Now:
Working on my FreePBX and VyOS vms.
Give me an hour to get a few drinks in me then ask away!
Ha! :smiling_face: This is a little different than using FreePBX on a Vultr instance. My current experiment is this:
- NAT traffic to the pbx (not ports configured on this)
- Allow only necessary ports in with my WAN_IN firewall rule set
- Let the responsive firewall do it's thing.
#2 is probably not necessary, as I could just let any traffic to the pbx through and just rely on the responsive firewall, but this is an experiment; thus, a chance to see if I can configure it like this.
You need 5060/5061 for SIP and SIP with TLS.
RTP is 10000-20000 by default. You can narrow that in FreePBX.
You'll likely want 443 and 22 for management purposes. But not necessarily if you access in some other way.
-
@jaredbusch That is really cool looking after checking it out
-
Getting the kids to bed.
-
Was going to mow, but it is raining here.
-
FreePBX 13 to 14 upgrade
-
Fiddling with mods to get Skyrim SE up and running for the first time.
-
@kelly said in What Are You Doing Right Now:
Fiddling with mods to get Skyrim SE up and running for the first time.
I'm just playing some Skyrim between other things, too!
-
Taking a little break from my lab PBX to get other tasks done.
-
@scottalanmiller said in What Are You Doing Right Now:
@kelly said in What Are You Doing Right Now:
Fiddling with mods to get Skyrim SE up and running for the first time.
I'm just playing some Skyrim between other things, too!
I've had to quit any significant gaming on my laptop for the moment. It tends to overheat. /cry.
Time to take it apart and redo thermal paste and clean out the fan, and quite possibly replace the fan.
-
Working on various projects.
