What Are You Doing Right Now
-
Just came in from a round of mowing.
-
@scottalanmiller said in What Are You Doing Right Now:
Just came in from a round of mowing.
It's too wet here to mow sadly.
-
@wrcombs said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
Just came in from a round of mowing.
It's too wet here to mow sadly.
Pretty hot here, for it.
-
@scottalanmiller said in What Are You Doing Right Now:
@wrcombs said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
Just came in from a round of mowing.
It's too wet here to mow sadly.
Pretty hot here, for it.
I'd take hot over rainy and wet grass!
-
But you don't have to mow in the rain.
-
@scottalanmiller said in What Are You Doing Right Now:
But you don't have to mow in the rain.
I enjoy mowing to an extent
-
@wrcombs said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
But you don't have to mow in the rain.
I enjoy mowing to an extent
I do a LITTLE. I only have a week whacker, so you get really sore, really quickly.
-
I can't mow the lawn yet and I was on a line for passports.
-
Ihop with the family
-
Just burned through the third battery of lawn mowing.
-
And a fourth one! I have two currently on chargers.
-
-
Working on my FreePBX and VyOS vms.
-
@eddiejennings said in What Are You Doing Right Now:
Working on my FreePBX and VyOS vms.
Give me an hour to get a few drinks in me then ask away!
-
Just sat down at a local sports bar in my hometown with a friend.
-
@jaredbusch said in What Are You Doing Right Now:
@eddiejennings said in What Are You Doing Right Now:
Working on my FreePBX and VyOS vms.
Give me an hour to get a few drinks in me then ask away!
Ha! :smiling_face: This is a little different than using FreePBX on a Vultr instance. My current experiment is this:
- NAT traffic to the pbx (not ports configured on this)
- Allow only necessary ports in with my WAN_IN firewall rule set
- Let the responsive firewall do it's thing.
#2 is probably not necessary, as I could just let any traffic to the pbx through and just rely on the responsive firewall, but this is an experiment; thus, a chance to see if I can configure it like this.
-
Wife and kids are out shopping for a soroban (Japanese Abacus) for my 8yo.
https://en.wikipedia.org/wiki/Soroban
She got a half sized one a while back and loves using it.
-
@eddiejennings said in What Are You Doing Right Now:
@jaredbusch said in What Are You Doing Right Now:
@eddiejennings said in What Are You Doing Right Now:
Working on my FreePBX and VyOS vms.
Give me an hour to get a few drinks in me then ask away!
Ha! :smiling_face: This is a little different than using FreePBX on a Vultr instance. My current experiment is this:
- NAT traffic to the pbx (not ports configured on this)
- Allow only necessary ports in with my WAN_IN firewall rule set
- Let the responsive firewall do it's thing.
#2 is probably not necessary, as I could just let any traffic to the pbx through and just rely on the responsive firewall, but this is an experiment; thus, a chance to see if I can configure it like this.
You need 5060/5061 for SIP and SIP with TLS.
RTP is 10000-20000 by default. You can narrow that in FreePBX.
-
Ordering pizza for dinner again.
-
Drinkiing.
