Apparently the 2.0 line of EdgeOS now supports ZeroTier

VoIP_n00b

@jplee I would like that too

jplee

I have it working! I needed to NAT.

alt text

I also disabled routing to 192.168.50.0/24 on ZeroTier Central and unchecked "Allow Bridging". They aren't needed.

VoIP_n00b

@jplee Interesting. I'll have to try it. As many details as you can provide would be great!

Dashrender

Why would you need to NAT? If you want the real IPs to work, you should be able to use them.

I don't NAT any of my other VPNs.

jplee

@Dashrender I couldn't get the ER-X to route LAN>ZT. NAT, although not ideal, did the trick for me. I'd love to hear if anyone has a no NAT solution.

Dashrender

@jplee said in Apparently the 2.0 line of EdgeOS now supports ZeroTier:

@Dashrender I couldn't get the ER-X to route LAN>ZT. NAT, although not ideal, did the trick for me. I'd love to hear if anyone has a no NAT solution.

Remind me what you setup is, I have a ER-X lying around I can set it up and give it a try this weekend.

jplee

@Dashrender Setup is outlined several posts above. Here

dinge

You don't need to set a NAT configuration if you set a route in the Zerotier web interface.

10.11.12.1/24 - (LAN)
192.168.1.1/24 via 10.11.12.1

The 10.11.12.1/24 is the Zerotier Network
The 192.168.1.1/24 is the Switch0 network for the ER-X

jplee

@dinge Do you have this working? It didn’t work for me. Remember, I’m trying to go from LAN to ZT, not the other way around.

dinge

@jplee From ZT to Lan I got this working without NAT or without a route configuration.

I could ping the ZT devices from my Switch0 LAN.

What I wanted was to be able to acces the complete Switch0 LAN from anywhere in the world when I am connected with a PC or phone in the same ZT Network.

dinge

@jplee This are the commands I used on a ER-X setup as WAN+2LAN2

sudo -i

curl -s https://install.zerotier.com | sudo bash

cd /var/lib

mv /var/lib/zerotier-one /config/scripts/

ln -s /config/scripts/zerotier-one

cp /opt/vyatta/share/perl5/Vyatta/Interface.pm /opt/vyatta/share/perl5/Vyatta/Interface.pm.backup

scp /Users/JohDoe/Downloads/zerotier-edgeos.tgz [email protected]:/home/ubnt
(from new terminal window)

tar -C / -xvzf /home/ubnt/zerotier-edgeos.tgz

connect zerotier (zerotieradress)

show interfaces zerotier

configure

set interfaces zerotier zt3jnycvh4 description ZerotierNetwork

commit ; save

exit

jplee

@dinge I did that exactly. Can we compare configs? Here's mine:

interfaces {
    ethernet eth0 {
        address 10.1.1.10/24
        description "Local Upstream"
        duplex auto
        speed auto
    }
    ethernet eth1 {
        description Local
        duplex auto
        speed auto
    }
    ethernet eth2 {
        description Local
        duplex auto
        speed auto
    }
    ethernet eth3 {
        description Local
        duplex auto
        speed auto
    }
    ethernet eth4 {
        description Local
        duplex auto
        poe {
            output off
        }
        speed auto
    }
    loopback lo {
    }
    switch switch0 {
        address 192.168.50.1/24
        description Local
        mtu 1500
        switch-port {
            interface eth1 {
            }
            interface eth2 {
            }
            interface eth3 {
            }
            vlan-aware disable
        }
    }
    zerotier ztklh3kllj {
        description ZeroTier
    }
}
protocols {
    static {
        route 0.0.0.0/0 {
            next-hop 10.1.1.1 {
                description "Default Gateway"
            }
        }
    }
}
service {
    dhcp-server {
        disabled false
        hostfile-update disable
        shared-network-name LAN2 {
            authoritative enable
            subnet 192.168.50.0/24 {
                default-router 192.168.50.1
                dns-server 192.168.50.1
                lease 86400
                start 192.168.50.38 {
                    stop 192.168.50.243
                }
            }
        }
        static-arp disable
        use-dnsmasq disable
    }
    dns {
        forwarding {
            cache-size 150
            listen-on switch0
            name-server 10.1.1.1
        }
    }
    gui {
        http-port 80
        https-port 443
        older-ciphers enable
    }
    nat {
        rule 5000 {
            description ZT-NAT
            destination {
                group {
                    address-group ADDRv4_eth0
                }
            }
            log disable
            outbound-interface ztklh3kllj
            protocol all
            source {
                group {
                }
            }
            type masquerade
        }
    }
    ssh {
        port 22
        protocol-version v2
    }
    unms {
        disable
    }
}

jplee

OK peoples. I got this working both ways: LAN > ZT and ZT > LAN. The trick was to configure a source NAT, which you can only do via the command line. Along with destination NAT, a bidirectional NAT is setup. BOOM! Here's my config:

firewall {
    all-ping enable
    broadcast-ping disable
    group {
        network-group LAN {
            description "Switch LAN"
            network 192.168.50.0/24
        }
        network-group Upstream {
            description "Upstream Network"
            network 10.1.1.0/24
        }
        network-group ZeroTier {
            description "ZeroTier Network"
            network 10.147.20.0/24
        }
    }
    ipv6-receive-redirects disable
    ipv6-src-route disable
    ip-src-route disable
    log-martians enable
    receive-redirects disable
    send-redirects enable
    source-validation disable
    syn-cookies enable
}
interfaces {
    ethernet eth0 {
        address 10.1.1.10/24
        description "Local Upstream"
        duplex auto
        speed auto
    }
    ethernet eth1 {
        description Local
        duplex auto
        speed auto
    }
    ethernet eth2 {
        description Local
        duplex auto
        speed auto
    }
    ethernet eth3 {
        description Local
        duplex auto
        speed auto
    }
    ethernet eth4 {
        description Local
        duplex auto
        poe {
            output off
        }
        speed auto
    }
    loopback lo {
    }
    switch switch0 {
        address 192.168.50.1/24
        description Local
        mtu 1500
        switch-port {
            interface eth1 {
            }
            interface eth2 {
            }
            interface eth3 {
            }
            vlan-aware disable
        }
    }
    zerotier ztklh3kllj {
        description ZeroTier
    }
}
protocols {
    static {
        route 0.0.0.0/0 {
            next-hop 10.1.1.1 {
                description "Default Gateway"
            }
        }
    }
}
service {
    dhcp-server {
        disabled false
        hostfile-update disable
        shared-network-name LAN2 {
            authoritative enable
            subnet 192.168.50.0/24 {
                default-router 192.168.50.1
                dns-server 192.168.50.1
                lease 86400
                start 192.168.50.38 {
                    stop 192.168.50.243
                }
            }
        }
        static-arp disable
        use-dnsmasq disable
    }
    dns {
        forwarding {
            cache-size 150
            listen-on switch0
            name-server 10.1.1.1
        }
    }
    gui {
        http-port 80
        https-port 443
        older-ciphers enable
    }
    nat {
        rule 1 {
            description "ZeroTier DNAT"
            destination {
                group {
                    network-group ZeroTier
                }
            }
            inbound-interface ztklh3kllj
            inside-address {
                address 10.1.1.10
            }
            log disable
            protocol all
            type destination
        }
        rule 5000 {
            description "ZeroTier SNAT"
            log disable
            outbound-interface ztklh3kllj
            outside-address {
                address 10.147.20.1
            }
            protocol all
            source {
                group {
                    network-group Upstream
                }
            }
            type source
        }
    }
    ssh {
        port 22
        protocol-version v2
    }
    unms {
        disable
    }
}