Trying the FreePBX 13 to 14 Upgrade
-
@fuznutz04 said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch Will definitely be following this. I have a few commercial modules as well.
Ah, nope, just the screen did not refresh.
notice that says 9 seconds.. it was was more than 9 seconds later. -
@fuznutz04 said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch Will definitely be following this. I have a few commercial modules as well.
But, I did need to click the "Commercial" button in the check for updates section again to manually check.
Everything was properly updated as part of the upgrade though.
-
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
then shut it down and made a snapshot in Vultr.
^^^^ THIS ^^^^
Any features/benefits from the upgrade? I have one or two installs I just dont feel like moving off FreePBX.
-
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
then shut it down and made a snapshot in Vultr.
^^^^ THIS ^^^^
Any features/benefits from the upgrade? I have one or two installs I just dont feel like moving off FreePBX.
Features of 14 over 13?
IMO and in no fixed order:- CentOS 7 based instead of CentOS 6.
- Auto updater for FreePBX modules and
yum - The UCP is supposed to be improved, but it looks like more work instead. Need more time with that.
-
@bigbear Asterisk 14 is available, but Digium only usually recommends the odd numbered releases.
-
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
then shut it down and made a snapshot in Vultr.
^^^^ THIS ^^^^
Any features/benefits from the upgrade? I have one or two installs I just dont feel like moving off FreePBX.
Features of 14 over 13?
IMO and in no fixed order:- CentOS 7 based instead of CentOS 6.
- Auto updater for FreePBX modules and
yum - The UCP is supposed to be improved, but it looks like more work instead. Need more time with that.
I gave the UCP a try, there was no default layout or apps. Kind of a miss there because by comparison it is maybe its stronger using-facing benefit.
-
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
then shut it down and made a snapshot in Vultr.
^^^^ THIS ^^^^
Any features/benefits from the upgrade? I have one or two installs I just dont feel like moving off FreePBX.
Features of 14 over 13?
IMO and in no fixed order:- CentOS 7 based instead of CentOS 6.
- Auto updater for FreePBX modules and
yum - The UCP is supposed to be improved, but it looks like more work instead. Need more time with that.
I gave the UCP a try, there was no default layout or apps. Kind of a miss there because by comparison it is maybe its stronger using-facing benefit.
That is what I am seeing and wondering WTF. but I did skip the tutorial.. so need to do that once. Maybe I missed something obvious.
-
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
then shut it down and made a snapshot in Vultr.
^^^^ THIS ^^^^
Any features/benefits from the upgrade? I have one or two installs I just dont feel like moving off FreePBX.
Features of 14 over 13?
IMO and in no fixed order:- CentOS 7 based instead of CentOS 6.
- Auto updater for FreePBX modules and
yum - The UCP is supposed to be improved, but it looks like more work instead. Need more time with that.
I gave the UCP a try, there was no default layout or apps. Kind of a miss there because by comparison it is maybe its stronger using-facing benefit.
That is what I am seeing and wondering WTF. but I did skip the tutorial.. so need to do that once. Maybe I missed something obvious.
LOL Yeah I did too and couldnt get it back
-
I setup the UCP today and found I had no CDR or CEL data since the upgrade.
Turns out the
/etc/odbc.inifile was not properly put back. It was left renamed as/etc/odbc.ini.rpmsaveinstead.Opening a issue on their tracker.
[root@fpbx ~]# cd /etc [root@fpbx etc]# ls acpi ethertypes java nanorc radiusclient-ng statetab.d adjtime event.d jvm netconfig rc0.d subgid aliases exports jvm-commmon NetworkManager rc1.d subuid aliases.db fail2ban jwhois.conf networks rc2.d subversion alternatives favicon.png krb5.conf nsswitch.conf rc3.d sudo.conf amportal.conf filesystems krb5.conf.d nsswitch.conf.bak rc4.d sudoers anacrontab firewalld ld.so.cache ntp rc5.d sudoers.d apcupsd fonts ld.so.conf ntp.conf rc6.d sudoers.rpmsave asound.conf freepbx.conf ld.so.conf.d odbc.ini.rpmsave rc.d sudo-ldap.conf asterisk fstab libaudit.conf odbcinst.ini rc.local sysconfig audisp gai.conf libnl openldap redhat-release sysctl.conf audit gconf libreport openvpn redhat-upgrade-tool sysctl.conf.rpmnew avahi gcrypt libuser.conf opt resolv.conf sysctl.d bash_completion.d gdbinit libuser.conf.rpmnew os-release rpc systemd bashrc gdbinit.d locale.conf pam.d rpm system-release binfmt.d ghostscript localtime passwd rsyncd.conf system-release-cpe centos-release-upstream gnupg login.defs passwd- rsyslog.conf tcsd.conf chkconfig.d GREP_COLORS login.defs.rpmsave passwd.OLD rsyslog.conf.rpmsave terminfo cron.d groff logrotate.conf pear rsyslog.d tmpfiles.d cron.daily group logrotate.d pear.conf rwtab tnc cron.deny group- lvm php.d rwtab.d tnc_config cron.hourly grub2.cfg machine-id php.ini sangoma trusted-key.key cron.monthly grub.conf magic php.ini.rpmnew sangoma-release udev crontab grub.d mailcap php-zts.d sangoma-release-upstream updatedb.conf cron.weekly gshadow mail.rc pkcs11 sasl2 vconsole.conf crypttab gshadow- man_db.conf pki schmooze vimrc csh.cshrc gss maven plymouth screenrc virc csh.login host.conf mdadm.conf pm securetty vsftpd dahdi hostname mime.types polkit-1 security wanpipe dbus-1 hosts mke2fs.conf popt.d selinux wgetrc default hosts.allow modprobe.d postfix sensors3.conf whois.conf depmod.d hosts.deny modules-load.d ppp services X11 dhcp httpd mongod.conf prelink.conf.d sestatus.conf xdg DIR_COLORS ImageMagick mongos.conf printcap sgml xinetd.conf DIR_COLORS.256color incron.conf motd profile shadow xinetd.d DIR_COLORS.lightbgcolor incron.d mtab profile.d shadow- yum dnsmasq.conf init multitail prosody shells yum.conf dnsmasq.conf.rpmnew init.d multitail.conf protocols shells.rpmsave yum.repos.d dnsmasq.d inittab my.cnf pulse skel yum.repos.d.preupgrade dracut.conf inputrc my.cnf.d python smi.conf dracut.conf.d iproute2 my.cnfpost_upgrade r2proto.conf ssh e2fsck.conf issue my.cnfpost_upgrade2 r2test.conf ssl environment issue.net my.cnf.rpmnew raddb statetab [root@fpbx etc]#fixed with
[root@fpbx etc]# cp /etc/odbc.ini.rpmsave /etc/odbc.iniand a reboot.
-
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
then shut it down and made a snapshot in Vultr.
^^^^ THIS ^^^^
Any features/benefits from the upgrade? I have one or two installs I just dont feel like moving off FreePBX.
Features of 14 over 13?
IMO and in no fixed order:- CentOS 7 based instead of CentOS 6.
- Auto updater for FreePBX modules and
yum - The UCP is supposed to be improved, but it looks like more work instead. Need more time with that.
I gave the UCP a try, there was no default layout or apps. Kind of a miss there because by comparison it is maybe its stronger using-facing benefit.
That is what I am seeing and wondering WTF. but I did skip the tutorial.. so need to do that once. Maybe I missed something obvious.
LOL Yeah I did too and couldnt get it back
Turns out you can reenable it in the settings of the UCP. I learned that from the wizard today.
-
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
Opening a issue on their tracker.
bug report added.
-
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
The UCP is supposed to be improved, but it looks like more work instead. Need more time with that.
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
I gave the UCP a try, there was no default layout or apps. Kind of a miss there because by comparison it is maybe its stronger using-facing benefit.
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
That is what I am seeing and wondering WTF.
We have plans to add customization by Administrators from within User Manager. We will also note to add default layouts in there as well.
The tutorial walks you through most of this however.
More to come in time.
-
@tm1000 said in Trying the FreePBX 13 to 14 Upgrade:
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
The UCP is supposed to be improved, but it looks like more work instead. Need more time with that.
@bigbear said in Trying the FreePBX 13 to 14 Upgrade:
I gave the UCP a try, there was no default layout or apps. Kind of a miss there because by comparison it is maybe its stronger using-facing benefit.
@jaredbusch said in Trying the FreePBX 13 to 14 Upgrade:
That is what I am seeing and wondering WTF.
We have plans to add customization by Administrators from within User Manager. We will also note to add default layouts in there as well.
The tutorial walks you through most of this however.
More to come in time.
Yeah, a default layout would be awesome. The tutorial is good. I went through it yesterday.
