Is this server strategy reckless and/or insane?
-
You're already saturating your RAID controller, so tossing one more drive in each to make them RAID 5 (assuming these are SSDs), one less thing to rebuild, restore/resync if you have a drive failure.
-
That's pretty common. Master to slave automated, manual fail back. Works fine as long as you are around most of the time.
-
I was wrong, it looks like you can fully automatically fail over to the slave and set it as the new master w/ the latest MySQL set up, so that makes the decision a bit easier.
As far as Raid 5 instead of 0, I'd thought that the performance of Raid 5 was absolutely terrible and that almost no one used it anymore, is that a wrong memory?
-
@creayt said in Is this server strategy reckless and/or insane?:
I was wrong, it looks like you can fully automatically fail over to the slave and set it as the new master w/ the latest MySQL set up, so that makes the decision a bit easier.
As far as Raid 5 instead of 0, I'd thought that the performance of Raid 5 was absolutely terrible and that almost no one used it anymore, is that a wrong memory?
No one uses RAID5 with spinning rust.
RAID5 is perfectly acceptable with SSDs
-
@dashrender I care about it, but because it's automatically replicated after each write there's a fully up-to-date, ready-to-go backup of it the next U down at all times. Could/would also push nightly backups offsite somewhere I suppose.
Looks like Raid 5 for SSDs can also, possibly, shorten their lifespan because of the parity writes: https://serverfault.com/questions/513909/what-are-the-main-points-to-avoid-raid5-with-ssd
-
@creayt said in Is this server strategy reckless and/or insane?:
As far as Raid 5 instead of 0, I'd thought that the performance of Raid 5 was absolutely terrible and that almost no one used it anymore, is that a wrong memory?
RAID 5 is the standard for SSDs. But you will take performance hits. But whether or not you can tell is the question. On an all flash array with caching, the hit is pretty small.
-
@creayt said in Is this server strategy reckless and/or insane?:
@dashrender I care about it, but because it's automatically replicated after each write there's a fully up-to-date, ready-to-go backup of it the next U down at all times. Could/would also push nightly backups offsite somewhere I suppose.
Looks like Raid 5 for SSDs can also, possibly, shorten their lifespan because of the parity writes: https://serverfault.com/questions/513909/what-are-the-main-points-to-avoid-raid5-with-ssd
Yes, but with enterprise drives and cache buffering, that's trivial. You are typically looking at decades before failure.
-
@scottalanmiller said in Is this server strategy reckless and/or insane?:
@creayt said in Is this server strategy reckless and/or insane?:
@dashrender I care about it, but because it's automatically replicated after each write there's a fully up-to-date, ready-to-go backup of it the next U down at all times. Could/would also push nightly backups offsite somewhere I suppose.
Looks like Raid 5 for SSDs can also, possibly, shorten their lifespan because of the parity writes: https://serverfault.com/questions/513909/what-are-the-main-points-to-avoid-raid5-with-ssd
Yes, but with enterprise drives and cache buffering, that's trivial. You are typically looking at decades before failure.
850 pros are not enterprise drives.
-
@tim_g said in Is this server strategy reckless and/or insane?:
@scottalanmiller said in Is this server strategy reckless and/or insane?:
@creayt said in Is this server strategy reckless and/or insane?:
@dashrender I care about it, but because it's automatically replicated after each write there's a fully up-to-date, ready-to-go backup of it the next U down at all times. Could/would also push nightly backups offsite somewhere I suppose.
Looks like Raid 5 for SSDs can also, possibly, shorten their lifespan because of the parity writes: https://serverfault.com/questions/513909/what-are-the-main-points-to-avoid-raid5-with-ssd
Yes, but with enterprise drives and cache buffering, that's trivial. You are typically looking at decades before failure.
850 pros are not enterprise drives.
Whoops, missed that.
-
@tim_g said in Is this server strategy reckless and/or insane?:
@scottalanmiller said in Is this server strategy reckless and/or insane?:
@creayt said in Is this server strategy reckless and/or insane?:
@dashrender I care about it, but because it's automatically replicated after each write there's a fully up-to-date, ready-to-go backup of it the next U down at all times. Could/would also push nightly backups offsite somewhere I suppose.
Looks like Raid 5 for SSDs can also, possibly, shorten their lifespan because of the parity writes: https://serverfault.com/questions/513909/what-are-the-main-points-to-avoid-raid5-with-ssd
Yes, but with enterprise drives and cache buffering, that's trivial. You are typically looking at decades before failure.
850 pros are not enterprise drives.
I was to slow to respond.. I didn't miss that.
-
Let me ask this.
The only thing that'll be stored on each Raid 0/5 is
The MySQL data files ( not the MySQL installation )
and
The image uploadsSo if a drive in the Raid 0 fails, I simply replace the drive, recreate the virtual disk, and then copy the database and images, which I think takes just a few minutes w/ two systems of this caliber 1U away from each other especially w/ so many cores to spare ( won't be competing w/ the load of the live site ).
So, since I have to drive an SSD over to the datacenter 10 minutes away, open the box, and get it in, a few more minutes for the copy feels like it'll be negligibly more time than if it failed w/ a Raid 5, where it would stay online ( though I don't know if my set up lets you do the Raid 5 replacement while the OS is running, maybe it does, or maybe I just hot swap the drive I'm not sure ).
So, because the full penalty for a Raid 0 failing vs. a Raid 5 in my set up is basically a few more minutes to copy the stuff manually, seems like the performance improvements would be worth the gamble. Is that logic sound or do y'all think just keeping the array online is better so 5 is the way to go anyway?
-
Just an FYI:
Posted by DELL-Josh Cr on 16 Mar 2015 15:41 Hi, ...if it is not a Dell drive we wonât have put our firmware on it that is designed for our controllers and we will not have validated it.... Thanks, Josh Craig Dell EMC | Enterprise Support Services Get support on Twitter: @DellCaresPRO Download our QRL app: iOS, Android, Windows -
@creayt Also forgot to bring up that Raid 0 also gives me way more capacity right so it'd give me terabyte(s) more before I had to scale to extra hardware? Can't remember how much Raid 5 subtracts.
-
That's not a horrible recovery strategy. But if the question is performance, how much downtime or effort caused by that offsets the performance difference? That's a real question. Will anyone notice the performance difference day to day? Will they notice five minutes or an hour of downtime? Will you notice having to do all of that work that could have been avoided?
Those are the real questions.
-
@creayt said in Is this server strategy reckless and/or insane?:
Let me ask this.
The only thing that'll be stored on each Raid 0/5 is
The MySQL data files ( not the MySQL installation )
and
The image uploadsSo if a drive in the Raid 0 fails, I simply replace the drive, recreate the virtual disk, and then copy the database and images, which I think takes just a few minutes w/ two systems of this caliber 1U away from each other especially w/ so many cores to spare ( won't be competing w/ the load of the live site ).
So, since I have to drive an SSD over to the datacenter 10 minutes away, open the box, and get it in, a few more minutes for the copy feels like it'll be negligibly more time than if it failed w/ a Raid 5, where it would stay online ( though I don't know if my set up lets you do the Raid 5 replacement while the OS is running, maybe it does, or maybe I just hot swap the drive I'm not sure ).
So, because the full penalty for a Raid 0 failing vs. a Raid 5 in my set up is basically a few more minutes to copy the stuff manually, seems like the performance improvements would be worth the gamble. Is that logic sound or do y'all think just keeping the array online is better so 5 is the way to go anyway?
Keeping the OBR5 online and recovering from that would be faster than having to completely rebuild an OBR0.
-
@tim_g What are the implications of this, do you know? For what it's worth none of these drives do the amber light thing in either server, all green and they report as SSDs etc. in the lifecycle tooling.
-
@creayt said in Is this server strategy reckless and/or insane?:
@creayt Also forgot to bring up that Raid 0 also gives me way more capacity right so it'd give me terabyte(s) more before I had to scale to extra hardware? Can't remember how much Raid 5 subtracts.
How much storage does this system need?
-
@dustinb3403 It's a community style site that's some kind of hybrid between Reddit and something like Mango Lassi, so the more users I get, the more content they'll generate ( mostly in the form of MySQL data ) and the more footprint I'll need, eventually having to go cloud probably if it takes off. But will be a huge volume of small database writes happening pretty much 24/7.
-
@creayt said in Is this server strategy reckless and/or insane?:
Let me ask this.
The only thing that'll be stored on each Raid 0/5 is
The MySQL data files ( not the MySQL installation )
and
The image uploadsSo if a drive in the Raid 0 fails, I simply replace the drive, recreate the virtual disk, and then copy the database and images, which I think takes just a few minutes w/ two systems of this caliber 1U away from each other especially w/ so many cores to spare ( won't be competing w/ the load of the live site ).
So, since I have to drive an SSD over to the datacenter 10 minutes away, open the box, and get it in, a few more minutes for the copy feels like it'll be negligibly more time than if it failed w/ a Raid 5, where it would stay online ( though I don't know if my set up lets you do the Raid 5 replacement while the OS is running, maybe it does, or maybe I just hot swap the drive I'm not sure ).
So, because the full penalty for a Raid 0 failing vs. a Raid 5 in my set up is basically a few more minutes to copy the stuff manually, seems like the performance improvements would be worth the gamble. Is that logic sound or do y'all think just keeping the array online is better so 5 is the way to go anyway?
as long as you have good backups, I guess this is doable. The cost of the extra drive over the life of the system seems pretty low. I guess I'd have to see how badly the RAID 5 penalty hit versus RAID 0 to see if that drive performance is worth the risk.
UREs are probably pretty low on these SSDs, but not zero, so something else to consider, what are the chances of a URE killing your RAID 0? (now Scott will educate me that these don't matter
- seriously don't know if do or not) -
@creayt said in Is this server strategy reckless and/or insane?:
@creayt Also forgot to bring up that Raid 0 also gives me way more capacity right so it'd give me terabyte(s) more before I had to scale to extra hardware? Can't remember how much Raid 5 subtracts.
One drive worth.
