P2V Windows 2008 R2
-
OK I think I've licked it - it was a storage related issue.
I originally found this page http://www.justandrew.net/2009/10/stop-0x0000007b-on-p2vd-windows-7.html
Which lead to this currently none working thread, but using the wayback machine I was able to see the page and the referenced post.
https://i.imgur.com/pdhnOIT.pngI booted into recovery mode, launched regedit, I loaded the hive off the
drive, made the following changeshklm\loaded hive\SYSTEM\ControlSet001\services\Intelide\Start = 0
hklm\loaded hive\SYSTEM\ControlSet001\services\pciide\Start = 3https://i.imgur.com/csYNpSC.png
https://i.imgur.com/8tAmiYs.pngNow in my case I had previously disabled the HP RAID services in hopes of solving this, so you might have to do that as well.
-
@Dashrender Nice find, did the VM boot?
-
-
@Dashrender ewww XenCenter... Eww
-
@DustinB3403 said in P2V Windows 2008 R2:
@Dashrender ewww XenCenter... Eww
While you can see in that picture I have an XO box, I just don't need it for this issue.
-
@Dashrender I know I'm just messing with you.
-
OK since I had already started the restore of my system using Windows Backup to ESXi before I found the solution - I decided to let it finish then see if it would require any fixing to make it function.
Unfortunately it BSOD'ed just like XS.
So I booted to recovery mode, change the last to registry entries,
hklm\loaded hive\SYSTEM\ControlSet001\services\Intelide\Start = 0
hklm\loaded hive\SYSTEM\ControlSet001\services\pciide\Start = 3No go - still BSOD
Back into the recovery console and changed
hklm\loaded hive\SYSTEM\ControlSet001\services\LSI_SAS\Start = 0
hklm\loaded hive\SYSTEM\ControlSet001\services\LSI_SAS2\Start = 0
(these were the first suggestions I found to try to fix this problem)BAM! worked - booted. it's slow as molasses, but I can work on that.
I guess JB got lucky in recovery, or I was unlucky, but I'm glad I stuck it out and solved the problem.
-
Now onto virtualizing the 2003 R2 application server.
-
@Dashrender said in P2V Windows 2008 R2:
Now onto virtualizing the 2003 R2 application server.
Upgrade.... problem solved.
-
@DustinB3403 said in P2V Windows 2008 R2:
@Dashrender said in P2V Windows 2008 R2:
Now onto virtualizing the 2003 R2 application server.
Upgrade.... problem solved.
lol - not really an option. and not really the point.
I'm trying to create one last working copy of these old servers before I decom them. I don't need them, but the images of VMs can sit on a drive in the safety deposit box for a while, and then I can destroy it later when I really don't care anymore.
-
@DustinB3403 said in P2V Windows 2008 R2:
@Dashrender said in P2V Windows 2008 R2:
Now onto virtualizing the 2003 R2 application server.
Upgrade.... problem solved.
So completely not the point, and totally the wrong attitude.
-
For informational purposes
cnvt-ocs-dev
If using clonezilla, and you break out to command line after it's errored out on you about not being able to restore multiple drives to different drive names, then your network mount point (assuming you're using one) should still be there.
Confirm by
cd /home/partimag
lsyou should see a list of whatever is in that location.
make a backup copy of your imgae - you have been warned
to become root
sudo sucnvt-ocs-dev imagename sda hda
(do this for each partition)once conversion is complete, start restore
-
@JaredBusch said in P2V Windows 2008 R2:
@DustinB3403 said in P2V Windows 2008 R2:
@Dashrender said in P2V Windows 2008 R2:
Now onto virtualizing the 2003 R2 application server.
Upgrade.... problem solved.
So completely not the point, and totally the wrong attitude.
So over your head....
-
@Dashrender said in P2V Windows 2008 R2:
@DustinB3403 said in P2V Windows 2008 R2:
@Dashrender said in P2V Windows 2008 R2:
Now onto virtualizing the 2003 R2 application server.
Upgrade.... problem solved.
lol - not really an option. and not really the point.
I'm trying to create one last working copy of these old servers before I decom them. I don't need them, but the images of VMs can sit on a drive in the safety deposit box for a while, and then I can destroy it later when I really don't care anymore.
I knew as much, and was making a crack at humor. Being server 2003 and all. Backing up the data alone would likely be good enough.
-
@DustinB3403 said in P2V Windows 2008 R2:
@Dashrender said in P2V Windows 2008 R2:
@DustinB3403 said in P2V Windows 2008 R2:
@Dashrender said in P2V Windows 2008 R2:
Now onto virtualizing the 2003 R2 application server.
Upgrade.... problem solved.
lol - not really an option. and not really the point.
I'm trying to create one last working copy of these old servers before I decom them. I don't need them, but the images of VMs can sit on a drive in the safety deposit box for a while, and then I can destroy it later when I really don't care anymore.
I knew as much, and was making a crack at humor. Being server 2003 and all. Backing up the data alone would likely be good enough.
No, backing up the data alone is a waste. You have to have a means to access the data. That means is part of what is being backed up.
-
Yep, I too definitely missed the joke.
The 2003 server is an IIS application server - so it's much more than just the data. I need the whole thing.
-
I'm sure I've used something like Acronis Backup and Restore in the past for trouble machines, when restore they have a "dissimilar hardware" option.
-
@hobbit666 said in P2V Windows 2008 R2:
I'm sure I've used something like Acronis Backup and Restore in the past for trouble machines, when restore they have a "dissimilar hardware" option.
Right - I was using the tools I had available at the time. XenConvert hasn't been officially supported since VS 6.2 or earlier.
I did solve the problem though - one that seemed pretty common - though as @hobbit666 mentioned - third party utilities apparently do often help resolve these problems sometimes.
