What Are You Doing Right Now

siringo

hmmm. trying to install mesh central on a host behind an authenticated proxy.
how do I add a username & pwd??

scottalanmiller

@siringo said in What Are You Doing Right Now:

hmmm. trying to install mesh central on a host behind an authenticated proxy.
how do I add a username & pwd??

What proxy is that?

siringo

@scottalanmiller said in What Are You Doing Right Now:

@siringo said in What Are You Doing Right Now:

hmmm. trying to install mesh central on a host behind an authenticated proxy.
how do I add a username & pwd??

What proxy is that?

corporate proxy at work.
think I have to go
npm config set proxy http://username:password#proxy:port

siringo

got it. i can get out 2 ways.
1 by supplying auth creds manually and out via proxy.old
2 by auto auth and going out by proxy.new
proxy.new worked with npm config set proxy http://ipaddress:port

siringo

well npm install meshcentral left me with ...

Should I blow it all away and start again?
If so, how do I blow it all away?

I have the time to blow it away and start again.

siringo

I'll check in tomorrow, that's enough for today.

black3dynamite

@siringo said in What Are You Doing Right Now:

well npm install meshcentral left me with ...

Should I blow it all away and start again?
If so, how do I blow it all away?

I have the time to blow it away and start again.

What you are seeing is normal. If you do want to blow it all away, just delete all the contents in C:\MeshCentral\

jt1001001

Viewing the CompTIA Network+ video series posted on here

JaredBusch

Just realized that the Vultr Firewall makes it kind of easy to have Cockpit easily accessible.

valentina

@jt1001001 same

WrCombs

afternoon coffee, Listening to the Jocko Willink Podcast, email purge finally, and getting sites installed for the new project.

siringo

@black3dynamite said in What Are You Doing Right Now:

@siringo said in What Are You Doing Right Now:

well npm install meshcentral left me with ...

Should I blow it all away and start again?
If so, how do I blow it all away?

I have the time to blow it away and start again.

What you are seeing is normal. If you do want to blow it all away, just delete all the contents in C:\MeshCentral\

@black3dynamite Okee doke, thanks for the help.

siringo

so i got mesh central working and it's pretty good.
when I did the install I didn't use the --install switch so I don't have Windows service.
How can I add a Windows service so it will auto start after a reboot??

Grey

@siringo said in What Are You Doing Right Now:

so i got mesh central working and it's pretty good.
when I did the install I didn't use the --install switch so I don't have Windows service.
How can I add a Windows service so it will auto start after a reboot??

If you know the service executable, use sc.

sc -?

ERROR:  Unrecognized command

DESCRIPTION:
        SC is a command line program used for communicating with the
        Service Control Manager and services.
USAGE:
        sc <server> [command] [service name] <option1> <option2>...


        The option <server> has the form "\\ServerName"
        Further help on commands can be obtained by typing: "sc [command]"
        Commands:
          query-----------Queries the status for a service, or
                          enumerates the status for types of services.
          queryex---------Queries the extended status for a service, or
                          enumerates the status for types of services.
          start-----------Starts a service.
          pause-----------Sends a PAUSE control request to a service.
          interrogate-----Sends an INTERROGATE control request to a service.
          continue--------Sends a CONTINUE control request to a service.
          stop------------Sends a STOP request to a service.
          config----------Changes the configuration of a service (persistent).
          description-----Changes the description of a service.
          failure---------Changes the actions taken by a service upon failure.
          failureflag-----Changes the failure actions flag of a service.
          sidtype---------Changes the service SID type of a service.
          privs-----------Changes the required privileges of a service.
          managedaccount--Changes the service to mark the service account
                          password as managed by LSA.
          qc--------------Queries the configuration information for a service.
          qdescription----Queries the description for a service.
          qfailure--------Queries the actions taken by a service upon failure.
          qfailureflag----Queries the failure actions flag of a service.
          qsidtype--------Queries the service SID type of a service.
          qprivs----------Queries the required privileges of a service.
          qtriggerinfo----Queries the trigger parameters of a service.
          qpreferrednode--Queries the preferred NUMA node of a service.
          qmanagedaccount-Queries whether a services uses an account with a
                          password managed by LSA.
          qprotection-----Queries the process protection level of a service.
          quserservice----Queries for a local instance of a user service template.
          delete----------Deletes a service (from the registry).
          create----------Creates a service. (adds it to the registry).
          control---------Sends a control to a service.
          sdshow----------Displays a service's security descriptor.
          sdset-----------Sets a service's security descriptor.
          showsid---------Displays the service SID string corresponding to an arbitrary name.
          triggerinfo-----Configures the trigger parameters of a service.
          preferrednode---Sets the preferred NUMA node of a service.
          GetDisplayName--Gets the DisplayName for a service.
          GetKeyName------Gets the ServiceKeyName for a service.
          EnumDepend------Enumerates Service Dependencies.

        The following commands don't require a service name:
        sc <server> <command> <option>
          boot------------(ok | bad) Indicates whether the last boot should
                          be saved as the last-known-good boot configuration
          Lock------------Locks the Service Database
          QueryLock-------Queries the LockStatus for the SCManager Database
EXAMPLE:
        sc start MyService


QUERY and QUERYEX OPTIONS:
        If the query command is followed by a service name, the status
        for that service is returned.  Further options do not apply in
        this case.  If the query command is followed by nothing or one of
        the options listed below, the services are enumerated.
    type=    Type of services to enumerate (driver, service, userservice, all)
             (default = service)
    state=   State of services to enumerate (inactive, all)
             (default = active)
    bufsize= The size (in bytes) of the enumeration buffer
             (default = 4096)
    ri=      The resume index number at which to begin the enumeration
             (default = 0)
    group=   Service group to enumerate
             (default = all groups)

SYNTAX EXAMPLES
sc query                - Enumerates status for active services & drivers
sc query eventlog       - Displays status for the eventlog service
sc queryex eventlog     - Displays extended status for the eventlog service
sc query type= driver   - Enumerates only active drivers
sc query type= service  - Enumerates only Win32 services
sc query state= all     - Enumerates all services & drivers
sc query bufsize= 50    - Enumerates with a 50 byte buffer
sc query ri= 14         - Enumerates with resume index = 14
sc queryex group= ""    - Enumerates active services not in a group
sc query type= interact - Enumerates all interactive services
sc query type= driver group= NDIS     - Enumerates all NDIS drivers

Ex:

sc create
DESCRIPTION:
        Creates a service entry in the registry and Service Database.
USAGE:
        sc <server> create [service name] [binPath= ] <option1> <option2>...

OPTIONS:
NOTE: The option name includes the equal sign.
      A space is required between the equal sign and the value.
 type= <own|share|interact|kernel|filesys|rec|userown|usershare>
       (default = own)
 start= <boot|system|auto|demand|disabled|delayed-auto>
       (default = demand)
 error= <normal|severe|critical|ignore>
       (default = normal)
 binPath= <BinaryPathName to the .exe file>
 group= <LoadOrderGroup>
 tag= <yes|no>
 depend= <Dependencies(separated by / (forward slash))>
 obj= <AccountName|ObjectName>
       (default = LocalSystem)
 DisplayName= <display name>
 password= <password>

EddieJennings

Just purchased RHCSA exam for June 26th

jt1001001

More layoffs today. All told about a 25% reduction in force so far

black3dynamite

Almost 24 hours since installing Pop! OS on my TV computer. It's been awhile since had a Debian/Ubuntu desktop based system on my home computers. My preferred OS, Fedora Workstation is on my desktop and laptop.

scottalanmiller

Did a Jitsi meeting all day with the team. First time that we ever did that. Was pretty fun.

EddieJennings

@jt1001001 said in What Are You Doing Right Now:

More layoffs today. All told about a 25% reduction in force so far

For Red Hat?

EddieJennings

@black3dynamite said in What Are You Doing Right Now:

Almost 24 hours since installing Pop! OS on my TV computer. It's been awhile since had a Debian/Ubuntu desktop based system on my home computers. My preferred OS, Fedora Workstation is on my desktop and laptop.

I ended up putting Pop_OS back on my System76 laptop (with 20.04). I'm always torn because I like both projects: Pop_OS and Fedora.