Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier)
-
@jaredbusch said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
One last question... and I plan to look into reservation tomorrow.. but what happens with the reservations in the event that the DHCP server goes down and, say, is un-recoverable? I mean, sure it would be trivial to fire up a new server, but you'd still have all the reservations to rebuild, unless they were exported as backup and then you could import or something.. and this is worst-case. DHCP would probably never go down, except for that one time....
I assume you have a Windows 2012 R2 or newer AD serve rthat is your DHCP server? If so, you can make a secondary.
If not, with any version back even to Server 2003, you can export your scope and reimport it on a new server.
2008 R2. But, what I will probably do is set up the new 2016 DC and then move DHCP role to that and set up the reservations and things. Then, when the time is right, I will point everything from old DC to new DC
-
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
One last question... and I plan to look into reservation tomorrow.. but what happens with the reservations in the event that the DHCP server goes down and, say, is un-recoverable? I mean, sure it would be trivial to fire up a new server, but you'd still have all the reservations to rebuild, unless they were exported as backup and then you could import or something.. and this is worst-case. DHCP would probably never go down, except for that one time....
DHCP Reservations are like normal DHCP Leases, so if you have them for, say 48 hours, you will likely have quite some time before things start to lose their leases. You have several choices...
- Have failover DHCP so that you are not dependent on a single once.
- Recreate everything by hand, for even 100 machines, this is trivial amounts of work as long as you document it.
- Take a backup and restore.
- Set the reservations programtically like through a script or state system.
nice, thanks!
-
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@jaredbusch said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
One last question... and I plan to look into reservation tomorrow.. but what happens with the reservations in the event that the DHCP server goes down and, say, is un-recoverable? I mean, sure it would be trivial to fire up a new server, but you'd still have all the reservations to rebuild, unless they were exported as backup and then you could import or something.. and this is worst-case. DHCP would probably never go down, except for that one time....
I assume you have a Windows 2012 R2 or newer AD serve rthat is your DHCP server? If so, you can make a secondary.
If not, with any version back even to Server 2003, you can export your scope and reimport it on a new server.
2008 R2. But, what I will probably do is set up the new 2016 DC and then move DHCP role to that and set up the reservations and things. Then, when the time is right, I will point everything from old DC to new DC
Don't forget those 2016 CALs (inside joke for those that saw the guy freak out about having to get CALs when updating Windows today.)
-
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
- Have failover DHCP so that you are not dependent on a single once.
Until he moves to 2016 he cannot have it "automagic" inside Windows Server. But he can manually have a backup made.
-
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@jaredbusch said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
One last question... and I plan to look into reservation tomorrow.. but what happens with the reservations in the event that the DHCP server goes down and, say, is un-recoverable? I mean, sure it would be trivial to fire up a new server, but you'd still have all the reservations to rebuild, unless they were exported as backup and then you could import or something.. and this is worst-case. DHCP would probably never go down, except for that one time....
I assume you have a Windows 2012 R2 or newer AD serve rthat is your DHCP server? If so, you can make a secondary.
If not, with any version back even to Server 2003, you can export your scope and reimport it on a new server.
2008 R2. But, what I will probably do is set up the new 2016 DC and then move DHCP role to that and set up the reservations and things. Then, when the time is right, I will point everything from old DC to new DC
Don't forget those 2016 CALs (inside joke for those that saw the guy freak out about having to get CALs when updating Windows today.)
Oh for sure. I already have them set up in our budget (thanks to help I got from you guys on here)
-
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
DHCP Reservations are like normal DHCP Leases, so if you have them for, say 48 hours, you will likely have quite some time before things start to lose their leases. You have several choices...
I typically set my lease time to 8 hours. I want things to break during the business day whenever possible.
Machines should renew ever 4 hours with that setting. So if shit hits the fan, someone should fail to renew before you go home and clue you in to an issue. -
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
I was wondering, is there an easier way to do this, such as to put all the domain controllers behind a name-space or address pool or something?
Nope. Being that you're static everywhere... you're stuck doing it the hard way. Take this as an opportunity to use DHCP + reservations for what you want static.
-
One thing to note, is that once you demote the old DC, you can easily change the IP of the new Server 2016 DC. It changes everything automatically these days.
Starting at Step 2 below, do following steps quickly.
-
Bring up new DC in parallel to the old one.
-
Transfer FSMO roles to new DC.
-
Demote old DC with DCPROMO.
-
Turn off old DC.
-
Set IP on new DC to what the old DC IP was. Possilble reboot new DC.
-
Verify DNS stuff reflects new DC having correct IP.
-
On a test client/user PC, do an
ipconfig /flushdns, maybe even a reboot. -
On a client/user PC, do an NSLOOKUP to domain.com.
-
On a client/user PC, enter
set log, verify it returns the correct DC.
-
-
@tim_g said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
One thing to note, is that once you demote the old DC, you can easily change the IP of the new Server 2016 DC. It changes everything automatically these days.
Starting at Step 2 below, do following steps quickly.
-
Bring up new DC in parallel to the old one.
-
Transfer FSMO roles to new DC.
-
Demote old DC with DCPROMO.
-
Turn off old DC.
-
Set IP on new DC to what the old DC IP was. Possilble reboot new DC.
-
Verify DNS stuff reflects new DC having correct IP.
-
On a test client/user PC, do an
ipconfig /flushdns, maybe even a reboot. -
On a client/user PC, do an NSLOOKUP to domain.com.
-
On a client/user PC, enter
set log, verify it returns the correct DC.
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
-
-
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Why not? That's more or less how it is meant to be done.
-
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Why not? That's more or less how it is meant to be done.
IDK, that's just what a lot of people advised against.. I thought you guys were some of those people... lol
-
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Why not? That's more or less how it is meant to be done.
IDK, that's just what a lot of people advised against.. I thought you guys were some of those people... lol
I don't think that we were, lol.
-
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Why not? That's more or less how it is meant to be done.
IDK, that's just what a lot of people advised against.. I thought you guys were some of those people... lol
I don't think that we were, lol.
I bounce around between reddit, mangolassi and sometimes SW so it's hard to remember...
-
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Why not? That's more or less how it is meant to be done.
IDK, that's just what a lot of people advised against.. I thought you guys were some of those people... lol
I don't think that we were, lol.
I bounce around between reddit, mangolassi and sometimes SW so it's hard to remember...
Do you remember someone giving some logic or colour as to why they felt that IPs had to be protected in that way?
-
I vaguely recall someone asked no about reusing a name. But I don’t think it was a year ago.
-
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Why not? That's more or less how it is meant to be done.
IDK, that's just what a lot of people advised against.. I thought you guys were some of those people... lol
I don't think that we were, lol.
I bounce around between reddit, mangolassi and sometimes SW so it's hard to remember...
There's your problem. I would pass on Reddit as much as possible. While those users do give some good advice there is just as much false information and crap you have to wade through.
-
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@tim_g said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
One thing to note, is that once you demote the old DC, you can easily change the IP of the new Server 2016 DC. It changes everything automatically these days.
Starting at Step 2 below, do following steps quickly.
-
Bring up new DC in parallel to the old one.
-
Transfer FSMO roles to new DC.
-
Demote old DC with DCPROMO.
-
Turn off old DC.
-
Set IP on new DC to what the old DC IP was. Possilble reboot new DC.
-
Verify DNS stuff reflects new DC having correct IP.
-
On a test client/user PC, do an
ipconfig /flushdns, maybe even a reboot. -
On a client/user PC, do an NSLOOKUP to domain.com.
-
On a client/user PC, enter
set log, verify it returns the correct DC.
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Not same IP, what you shouldn’t do is name it the same only. Also even if you have setup DNS statically you can use Group Policy and Powershell to change the DNS server on the servers which is pretty much easy to do.
-
-
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@scottalanmiller said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Why not? That's more or less how it is meant to be done.
IDK, that's just what a lot of people advised against.. I thought you guys were some of those people... lol
I don't think that we were, lol.
I bounce around between reddit, mangolassi and sometimes SW so it's hard to remember...
Do you remember someone giving some logic or colour as to why they felt that IPs had to be protected in that way?
No, I don't.. that's ok though. This thread was a good refresher and I will put the advice down in my notes for when I execute the plan.
Thanks guys.
-
@dbeato said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@dave247 said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
@tim_g said in Using name-spaces or address pools for domain controllers? (things to make replacing DC's easier):
One thing to note, is that once you demote the old DC, you can easily change the IP of the new Server 2016 DC. It changes everything automatically these days.
Starting at Step 2 below, do following steps quickly.
-
Bring up new DC in parallel to the old one.
-
Transfer FSMO roles to new DC.
-
Demote old DC with DCPROMO.
-
Turn off old DC.
-
Set IP on new DC to what the old DC IP was. Possilble reboot new DC.
-
Verify DNS stuff reflects new DC having correct IP.
-
On a test client/user PC, do an
ipconfig /flushdns, maybe even a reboot. -
On a client/user PC, do an NSLOOKUP to domain.com.
-
On a client/user PC, enter
set log, verify it returns the correct DC.
See now this was my original plan like a year ago... almost everyone strongly advised against using the same IP for the new DC..
Not same IP, what you shouldn’t do is name it the same only. Also even if you have setup DNS statically you can use Group Policy and Powershell to change the DNS server on the servers which is pretty much easy to do.
New name, same IP works, yeah.
-
-
Reddit for IT stuff, the same site that host r/TheDonald ?
