What Are You Doing Right Now
-
Just browsed the SW forums for a few minutes since I haven't done that in a while. Back to my happy place with a Linux book.
-
@kelly said in What Are You Doing Right Now:
@dustinb3403 said in What Are You Doing Right Now:
@kelly said in What Are You Doing Right Now:
Just finished pulling out Cisco small business APs and replacing them with Ubiquiti.
Good times.
We need some more public reviews of the Ubiquiti kit as I'm trying to get this pushed through myself.
The price was low enough to justify getting a demo unit and switch. The demo unit played much more nicely with RADIUS, and then Krack put the final nail in the coffin. UBNT had a patch out the day of the announcement, and Cisco hasn't released anything new for our old system in several months with no official word on the eta of a patch. It is just listed as TBD in the Cisco blog post about Krack.
That’s what I am worrying about at my job.
-
Almost at PC in SW...hopefully I get there soon
-
@dustinb3403 said in What Are You Doing Right Now:
@kelly said in What Are You Doing Right Now:
Just finished pulling out Cisco small business APs and replacing them with Ubiquiti.
Good times.
We need some more public reviews of the Ubiquiti kit as I'm trying to get this pushed through myself.
how public? I deployed 18 APs last March.. they are awesome!
-
@kelly said in What Are You Doing Right Now:
@dustinb3403 said in What Are You Doing Right Now:
@kelly said in What Are You Doing Right Now:
Just finished pulling out Cisco small business APs and replacing them with Ubiquiti.
Good times.
We need some more public reviews of the Ubiquiti kit as I'm trying to get this pushed through myself.
The price was low enough to justify getting a demo unit and switch. The demo unit played much more nicely with RADIUS, and then Krack put the final nail in the coffin. UBNT had a patch out the day of the announcement, and Cisco hasn't released anything new for our old system in several months with no official word on the eta of a patch. It is just listed as TBD in the Cisco blog post about Krack.
I heard that the issue is solely on the client side. So unless you have APs in a mess mode (i.e. one is a client and the other is an AP for the wireless client) APs aren't affected by Krack.
-
About to teach some saxophone lessons, then resume editing this afternoon.
-
@eddiejennings said in What Are You Doing Right Now:
About to teach some saxophone lessons, then resume editing this afternoon.
Yours? Or for other people?
-
@scottalanmiller said in What Are You Doing Right Now:
@eddiejennings said in What Are You Doing Right Now:
About to teach some saxophone lessons, then resume editing this afternoon.
Yours? Or for other people?
My resume. You folks were kind enough to ask questions and give suggestions. I finally have time to process and apply them. :). This week was crazy with outside-of9-5 tasks
-
Just Setup StrongArm for my home and thinking if I should/not do a how to tutorial.
-
-
@wrx7m Yes.
-
@wrx7m said in What Are You Doing Right Now:
@dbeato said in What Are You Doing Right Now:
StrongArm
This? - https://strongarm.io/
That's the one. They sponsored the Scott Alan Miller Afterparty at Touche last week.
-
@scottalanmiller said in What Are You Doing Right Now:
@wrx7m said in What Are You Doing Right Now:
@dbeato said in What Are You Doing Right Now:
StrongArm
This? - https://strongarm.io/
That's the one. They sponsored the Scott Alan Miller Afterparty at Touche last week.
Oh cool
-
Reading ML threads about personal file storage.
-
Starting fresh with my server running KVM. Reading about how to configure a network bridge.
Edit: Bah, should've read the link before posting. Was looking for how to do this using CLI rather than the GUI.
-
Heading to sleep.
In the Hyper-V world the procedure is pretty straight forward for making an external virtual switch which uses one of your NICs to pass traffic from your VMs to the rest of the network. Hopefully after some sleep I’ll have an aha moment for doing this with KVM.
-
@eddiejennings said in What Are You Doing Right Now:
Starting fresh with my server running KVM. Reading about how to configure a network bridge.
Edit: Bah, should've read the link before posting. Was looking for how to do this using CLI rather than the GUI.
The new way is using macvtap (bridge). If you wanted to have the host and guest to communicate, you setup an isolated network using libvirt.
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualization_Host_Configuration_and_Guest_Installation_Guide/App_Macvtap.htmlHere's how to setup a network bridge using iproute2 and brctl.
https://fedoramagazine.org/build-network-bridge-fedora/ -
@eddiejennings said in What Are You Doing Right Now:
Heading to sleep.
In the Hyper-V world the procedure is pretty straight forward for making an external virtual switch which uses one of your NICs to pass traffic from your VMs to the rest of the network. Hopefully after some sleep I’ll have an aha moment for doing this with KVM.
When I setup my KVM system, I did nothing. When you make the VM, you just choose bridged -> macvtap and it works. The host cannot talk back, but that doesn't really matter.
I guess you can go to the bother to setup a full bridge and all, then just choose that network when making the VM.
Dunno what is best practice. I guess I should learn that part.
-
My Windows 10 Pro 1703 (MAK license) updated to 1709. Now I need to install the new RSAT.
-
Waiting for Sunday dinner
