What Are You Doing Right Now
-
@EddieJennings said in What Are You Doing Right Now:
@dbeato It's not for a lab. Synology will eventually be storage for backups. Part of the server rebuild is bringing the VHDs used for VMs to local storage and getting rid the last of my compainy's RAID 5 setups. I'd rather not have the Synology sitting and doing nothing; thus. . .
Yes, Synology is probably safer than the RAID5 volume at this point.
-
@dbeato said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
@dbeato It's not for a lab. Synology will eventually be storage for backups. Part of the server rebuild is bringing the VHDs used for VMs to local storage and getting rid the last of my compainy's RAID 5 setups. I'd rather not have the Synology sitting and doing nothing; thus. . .
Yes, Synology is probably safer than the RAID5 volume at this point.
Yeah. Synology will only be used for backups. VMs will be running off of local SATA drives.
-
Goofing with a ESP8266 board - coded it to pull NTP from NIST,
sending NTP packet... packet received, length=48 Seconds since Jan 1 1900 = 3705838150 Unix time = 1496849350 The UTC time is 15:29:10 -
@EddieJennings said in What Are You Doing Right Now:
@dbeato said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
@dbeato It's not for a lab. Synology will eventually be storage for backups. Part of the server rebuild is bringing the VHDs used for VMs to local storage and getting rid the last of my compainy's RAID 5 setups. I'd rather not have the Synology sitting and doing nothing; thus. . .
Yes, Synology is probably safer than the RAID5 volume at this point.
Yeah. Synology will only be used for backups. VMs will be running off of local SATA drives.
I use Synologys for backups and they have worked out great for 2 years now.
-
Just installed KVM/QEMU on my Korora 25 laptop. Quick and snappy.
sudo dnf groupinstall virtualizationthen rebootStarting guests are super quick. Kicking myself as to why I haven't done this sooner.
-
@gjacobse Invent it and patent it. I'm sure there is a demand.
-
@NerdyDad said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
@dbeato said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
@dbeato It's not for a lab. Synology will eventually be storage for backups. Part of the server rebuild is bringing the VHDs used for VMs to local storage and getting rid the last of my compainy's RAID 5 setups. I'd rather not have the Synology sitting and doing nothing; thus. . .
Yes, Synology is probably safer than the RAID5 volume at this point.
Yeah. Synology will only be used for backups. VMs will be running off of local SATA drives.
I use Synologys for backups and they have worked out great for 2 years now.
Perfect use case for them.
-
@Kyle said in What Are You Doing Right Now:
@gjacobse Invent it and patent it. I'm sure there is a demand.
For a clock?
-
@scottalanmiller said in What Are You Doing Right Now:
@Kyle said in What Are You Doing Right Now:
@gjacobse Invent it and patent it. I'm sure there is a demand.
For a clock?
Forgot to quote my reply for the Magnetic USB charger cord issue.
-
@Kyle said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Kyle said in What Are You Doing Right Now:
@gjacobse Invent it and patent it. I'm sure there is a demand.
For a clock?
Forgot to quote my reply for the Magnetic USB charger cord issue.
OH!
-
@Kyle said in What Are You Doing Right Now:
@gjacobse Invent it and patent it. I'm sure there is a demand.
Not my site or code, so I have no right to do that,.. and it Open Source...
-
@Kyle said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Kyle said in What Are You Doing Right Now:
@gjacobse Invent it and patent it. I'm sure there is a demand.
For a clock?
Forgot to quote my reply for the Magnetic USB charger cord issue.
Oh - okay.
-
@Kyle said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Kyle said in What Are You Doing Right Now:
@gjacobse Invent it and patent it. I'm sure there is a demand.
For a clock?
Forgot to quote my reply for the Magnetic USB charger cord issue.
-
@gjacobse said in What Are You Doing Right Now:
@Kyle said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Kyle said in What Are You Doing Right Now:
@gjacobse Invent it and patent it. I'm sure there is a demand.
For a clock?
Forgot to quote my reply for the Magnetic USB charger cord issue.
Did you see the pricing on those? That's awful spendy for a cable set.
-
@Kyle said in What Are You Doing Right Now:
@gjacobse said in What Are You Doing Right Now:
@Kyle said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Kyle said in What Are You Doing Right Now:
@gjacobse Invent it and patent it. I'm sure there is a demand.
For a clock?
Forgot to quote my reply for the Magnetic USB charger cord issue.
Did you see the pricing on those? That's awful spendy for a cable set.
looks like only available via Amazon.DE (and other listed sites).
-
Next challenge:
Figure out why I cannot connect to my test-hyperv host using Hyper-V manager with my domain administrator credentials (both my workstaiton and the HyperV 2016 host are on the same domain), yet I can enter a remote powershell session to it.
-
@EddieJennings said in What Are You Doing Right Now:
Next challenge:
Figure out why I cannot connect to my test-hyperv host using Hyper-V manager with my domain administrator credentials (both my workstaiton and the HyperV 2016 host are on the same domain), yet I can enter a remote powershell session to it.
Do you have remote desktop privileges to the host? Is there a service not running that should be running?
-
@NerdyDad said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
Next challenge:
Figure out why I cannot connect to my test-hyperv host using Hyper-V manager with my domain administrator credentials (both my workstaiton and the HyperV 2016 host are on the same domain), yet I can enter a remote powershell session to it.
Do you have remote desktop privileges to the host? Is there a service not running that should be running?
From what I can see "yes." Hyper-V virtual machine management service is running. In addition I added my domain admin account to the local Hyper-V Administrators group. Another interesting note is that I also cannot connect from my workstation (Windows 10 pro) to the hyper-v 2016 server with either the "administrator" account for the domain nor the local administrator account.
-
@EddieJennings said in What Are You Doing Right Now:
@NerdyDad said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
Next challenge:
Figure out why I cannot connect to my test-hyperv host using Hyper-V manager with my domain administrator credentials (both my workstaiton and the HyperV 2016 host are on the same domain), yet I can enter a remote powershell session to it.
Do you have remote desktop privileges to the host? Is there a service not running that should be running?
From what I can see "yes." Hyper-V virtual machine management service is running. In addition I added my domain admin account to the local Hyper-V Administrators group. Another interesting note is that I also cannot connect from my workstation (Windows 10 pro) to the hyper-v 2016 server with either the "administrator" account for the domain nor the local administrator account.
Firewall issues?
-
@DustinB3403 said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
@NerdyDad said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
Next challenge:
Figure out why I cannot connect to my test-hyperv host using Hyper-V manager with my domain administrator credentials (both my workstaiton and the HyperV 2016 host are on the same domain), yet I can enter a remote powershell session to it.
Do you have remote desktop privileges to the host? Is there a service not running that should be running?
From what I can see "yes." Hyper-V virtual machine management service is running. In addition I added my domain admin account to the local Hyper-V Administrators group. Another interesting note is that I also cannot connect from my workstation (Windows 10 pro) to the hyper-v 2016 server with either the "administrator" account for the domain nor the local administrator account.
Firewall issues?
Gripe is about permissions. Just trying to figure out which permissions my domain admin account in the Hyper-V Administrators account is missing.
