What Are You Doing Right Now
-
@scottalanmiller said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
I don't mind ads that don't track me... static images along are fine.. sites need to make money..
but tracking is where I draw the line!
All plain PNGs here. Except the new ones, those are JPGs by accident. Getting those fixed shortly.
Well that may be true - but this site still has TONS of tracking on it.. uBlock counter is over 800 right now.
That counter rarely resets if I remember correctly. I use Privacy Badger right now, and it's only showing 16.
Sure, it doesn't go down, but is normally going up up up..
But if it is scanning basic things like Google, and it increments with every load, of course it is going to appear high.
What is google doing if not tracking?
-
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
I don't mind ads that don't track me... static images along are fine.. sites need to make money..
but tracking is where I draw the line!
All plain PNGs here. Except the new ones, those are JPGs by accident. Getting those fixed shortly.
Well that may be true - but this site still has TONS of tracking on it.. uBlock counter is over 800 right now.
That counter rarely resets if I remember correctly. I use Privacy Badger right now, and it's only showing 16.
Sure, it doesn't go down, but is normally going up up up..
But if it is scanning basic things like Google, and it increments with every load, of course it is going to appear high.
What is google doing if not tracking?
But counting Google over and over again is misleading.
-
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
I don't mind ads that don't track me... static images along are fine.. sites need to make money..
but tracking is where I draw the line!
All plain PNGs here. Except the new ones, those are JPGs by accident. Getting those fixed shortly.
Well that may be true - but this site still has TONS of tracking on it.. uBlock counter is over 800 right now.
That counter rarely resets if I remember correctly. I use Privacy Badger right now, and it's only showing 16.
Sure, it doesn't go down, but is normally going up up up..
But if it is scanning basic things like Google, and it increments with every load, of course it is going to appear high.
What is google doing if not tracking?
But is it tracking YOU or just collecting site info? What do you classify as tracking?
-
Got myself a server from Wholesaleinternet as well. XS6.5, guess I get to see how upgrading to 7 goes, but for now I
watch cat /proc/mdstatLooks like another hour or so, not terrible. But no raid by default = sad.
-
@scottalanmiller said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
Going to RMA a second dsl modem later today.
Different brand, different issues.I am now seriously considering the ERX, AP lite and a separate dsl modem.
What's stopping you from just pulling the trigger?
A few things.
1). Mrs nadnerB isn't keen on having three devices for Internet access
2). it's a fair bit more expensive to go that route (I need VDSL as that's the
3). I'm not 100% sure if I'll get a choice of warranty swap or refund....
blah blah blah
...
Hmmmm, I might be able to work this using my current modem router as just a modem....
back to the drawing board to re-evaluate and await the RMA resultsNow you've lost me - why would Mrs Nader see anything more than the AP? The test should be hiding in a closet somewhere.
Coz we turn everything off when we aren't using it.
I know the AP is PoE but it's something else that has to boot.You turn off your network at night?
Yes. I'm not using it and electricity is expensive. Why pay for something I'm not using?
I have no VoIP and there is nothing I access remotely. -
@coliver said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
Going to RMA a second dsl modem later today.
Different brand, different issues.I am now seriously considering the ERX, AP lite and a separate dsl modem.
What's stopping you from just pulling the trigger?
A few things.
1). Mrs nadnerB isn't keen on having three devices for Internet access
2). it's a fair bit more expensive to go that route (I need VDSL as that's the
3). I'm not 100% sure if I'll get a choice of warranty swap or refund....
blah blah blah
...
Hmmmm, I might be able to work this using my current modem router as just a modem....
back to the drawing board to re-evaluate and await the RMA resultsNow you've lost me - why would Mrs Nader see anything more than the AP? The test should be hiding in a closet somewhere.
Coz we turn everything off when we aren't using it.
I know the AP is PoE but it's something else that has to boot.You turn off your network at night?
And if you do why? Seems like something odd to me, curious as to your reasoning.
It's not being used. Pointless to keep it on for the sole purpose of not having the time to use it until I get home from work the next day.
-
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
Going to RMA a second dsl modem later today.
Different brand, different issues.I am now seriously considering the ERX, AP lite and a separate dsl modem.
What's stopping you from just pulling the trigger?
A few things.
1). Mrs nadnerB isn't keen on having three devices for Internet access
2). it's a fair bit more expensive to go that route (I need VDSL as that's the
3). I'm not 100% sure if I'll get a choice of warranty swap or refund....
blah blah blah
...
Hmmmm, I might be able to work this using my current modem router as just a modem....
back to the drawing board to re-evaluate and await the RMA resultsNow you've lost me - why would Mrs Nader see anything more than the AP? The test should be hiding in a closet somewhere.
Coz we turn everything off when we aren't using it.
I know the AP is PoE but it's something else that has to boot.Put it on a power strip.. all three things turn off by one button.
Still have to wait for all three of them to boot.
(notice there is a 'B' in nadnerB, Dashrende )Anyhoo, that and all the other previously said stuff is why I haven't gone that route previously.
-
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
Going to RMA a second dsl modem later today.
Different brand, different issues.I am now seriously considering the ERX, AP lite and a separate dsl modem.
What's stopping you from just pulling the trigger?
A few things.
1). Mrs nadnerB isn't keen on having three devices for Internet access
2). it's a fair bit more expensive to go that route (I need VDSL as that's the
3). I'm not 100% sure if I'll get a choice of warranty swap or refund....
blah blah blah
...
Hmmmm, I might be able to work this using my current modem router as just a modem....
back to the drawing board to re-evaluate and await the RMA resultsNow you've lost me - why would Mrs Nader see anything more than the AP? The test should be hiding in a closet somewhere.
Coz we turn everything off when we aren't using it.
I know the AP is PoE but it's something else that has to boot.Put it on a power strip.. all three things turn off by one button.
Still have to wait for all three of them to boot.
(notice there is a 'B' in nadnerB, Dashrende )Anyhoo, that and all the other previously said stuff is why I haven't gone that route previously.
Don't they boot in parallel?
-
@scottalanmiller said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@nadnerB said in What Are You Doing Right Now:
Going to RMA a second dsl modem later today.
Different brand, different issues.I am now seriously considering the ERX, AP lite and a separate dsl modem.
What's stopping you from just pulling the trigger?
A few things.
1). Mrs nadnerB isn't keen on having three devices for Internet access
2). it's a fair bit more expensive to go that route (I need VDSL as that's the
3). I'm not 100% sure if I'll get a choice of warranty swap or refund....
blah blah blah
...
Hmmmm, I might be able to work this using my current modem router as just a modem....
back to the drawing board to re-evaluate and await the RMA resultsNow you've lost me - why would Mrs Nader see anything more than the AP? The test should be hiding in a closet somewhere.
Coz we turn everything off when we aren't using it.
I know the AP is PoE but it's something else that has to boot.Put it on a power strip.. all three things turn off by one button.
Still have to wait for all three of them to boot.
(notice there is a 'B' in nadnerB, Dashrende )Anyhoo, that and all the other previously said stuff is why I haven't gone that route previously.
Don't they boot in parallel?
Yes, but it's entirely my issue for not taking the time to go through it with Mrs nadnerB
-
@travisdh1 their website is aweful.
-
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 their website is aweful.
Yeah, looks like something I'd throw up as quick as I could.
-
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 their website is aweful.
Yeah, looks like something I'd throw up as quick as I could.
?
-
@nadnerB said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@DustinB3403 said in What Are You Doing Right Now:
@travisdh1 their website is aweful.
Yeah, looks like something I'd throw up as quick as I could.
?
Yep.
-
Heavy rain here this morning.
-
A millipede is currently pooping on my wall.
-
Here is a new one for me. "Codes our DB". Like.... he writes the actual database code itself, instead of using SQL Server?
-
What am I missing?
https://community.spiceworks.com/topic/1971689-what-am-i-and-why
-
Working on more Flickr uploads. Man even pictures take forever from here.
-
@scottalanmiller A post? That link doesnt work anymore
-
So, just found out my lab Dell 2950 server wont support Hyper-V 2016 because it doesn't' have SLAT processors:
"Hyper-V in the vNext version of Windows Server will only work on processors with (SLAT) Secondary Level Address Translation which is also known as (EPT) Extended Page Table for Intel processors. If you have older servers with processors that do not support SLAT, you will need to use Windows Server 2012 R2. This version of Hyper-V does not require SLAT support in the processor."
http://www.nodefinity.net/post/hyper-v-on-poweredge-2900-2950-the-end-of-the-road-is-windows-server-2012-r2
