SIP registrations failing for 2 phones
-
@fuznutz04 said in SIP registrations failing for 2 phones:
I didn't install the network, just setting up some new phones. But the more I poke around, the more I am starting to believe that putting the comcast modem in "bridge mode" and getting a new router/firewall in here might solve the problem.
Good idea regardless.
-
Brought back the 2 non-working phones to my office, plugged them in, watched the Asterisk console, and haven't had a single "unregister" in an hour. Looks like that Comcast modem/router just sucks. Time for an ERL.
-
@fuznutz04 said in SIP registrations failing for 2 phones:
Brought back the 2 non-working phones to my office, plugged them in, watched the Asterisk console, and haven't had a single "unregister" in an hour. Looks like that Comcast modem/router just sucks. Time for an ERL.
If you end up with an ERL out of it, that's a huge win
-
@StrongBad Yep, I've put those in at numerous businesses, and they work great with remote PBXs. Actually, I haven't found anything that they are NOT good at yet for SMBs.
-
ERLs really are amazing. We are so happy with all of ours.
-
@fuznutz04 said in SIP registrations failing for 2 phones:
@StrongBad Yep, I've put those in at numerous businesses, and they work great with remote PBXs. Actually, I haven't found anything that they are NOT good at yet for SMBs.
They've always worked great for me, too.
-
I'm planning to get on the ERX bandwagon soon-ish.
-
@dafyre said in SIP registrations failing for 2 phones:
I'm planning to get on the ERX bandwagon soon-ish.
ERX is very small. Most of us use ERL in business, ERX for home. I want the ERPro because it is rackmount when possible.
-
@dafyre What Scott said... ERX at home, and ERL or greater in business. My main reason for this is the Console port access. I ran into a situation where my config was borked, and after a simple restart, my ERX didn't come back online. I had no idea where it was failing so I had to break out the paper clip and start over. If I would have used the ER Lite, I could have connected via console port and checked out what was going on.
-
@fuznutz04 said in SIP registrations failing for 2 phones:
@dafyre What Scott said... ERX at home, and ERL or greater in business. My main reason for this is the Console port access. I ran into a situation where my config was borked, and after a simple restart, my ERX didn't come back online. I had no idea where it was failing so I had to break out the paper clip and start over. If I would have used the ER Lite, I could have connected via console port and checked out what was going on.
I like console ports, lol. Prices aren't too bad on Amazon.... Now to talk to Santa Clause.
-
@dafyre Not sure where you are located, but in the US, you can buy direct from the manufacturer.
-
@fuznutz04 said in SIP registrations failing for 2 phones:
@dafyre Not sure where you are located, but in the US, you can buy direct from the manufacturer.
Yea. Still gotta talk to Santa Clause, ha ha.
-
@fuznutz04 said in SIP registrations failing for 2 phones:
@dafyre Not sure where you are located, but in the US, you can buy direct from the manufacturer.
But amazon prime makes it cheaper since no shipping usually.
-
@JaredBusch said in SIP registrations failing for 2 phones:
@fuznutz04 said in SIP registrations failing for 2 phones:
@dafyre Not sure where you are located, but in the US, you can buy direct from the manufacturer.
But amazon prime makes it cheaper since no shipping usually.
True. Amazon prime is the best. Their video selection is lacking for me, but their prime music works great for me. That, along with free shipping, you really cant beat it. Also, they have the ERL for 88 bucks right now.
-
@JaredBusch you reckon it's the 60xx port problem that we've both run into?
-
Put the phones back on network. And under the reporting tab in Fpbx check your devices. See if the two devices that are not working are getting super high ports. If so you can manually assign a sip port within range and they will work. Sorry typing from my phone at a client so I don't have my specific notes or anything. @JaredBusch helped me with this problem in the past.
-
@hubtechagain said in SIP registrations failing for 2 phones:
Put the phones back on network. And under the reporting tab in Fpbx check your devices. See if the two devices that are not working are getting super high ports. If so you can manually assign a sip port within range and they will work. Sorry typing from my phone at a client so I don't have my specific notes or anything. @JaredBusch helped me with this problem in the past.
There is one phone there right now that is now doing the same thing (this is the 3rd phone now) It currently is using port 42808
-
@fuznutz04 you can manually assign ports and it will fix this problem. 6051,2,3,4,5 etc if I'm not mistaken. Make sure not to duplicate any. That will get them functioning until you replace their shotty router.
-
@hubtechagain You mean manually specify in both the phone as well as the extension settings for these particular extensions?
-
@fuznutz04 said in SIP registrations failing for 2 phones:
@hubtechagain You mean manually specify in both the phone as well as the extension settings for these particular extensions?
Just in the phone.
You change the outbound port to be either random or something specific and all different.
Crappy routers have problems with multiple devices and NAT on the same port.
In the Yealink phones, they specifically all use port 5060 as their outbound port even though that should not be required. Changing them to 5061, 5062, etc will resolve crappy router NAT issues.
This has nothing to do with the PBX. It still uses 5060 for all the incoming SIP registrations.
