Solved IIS Running But Cannot Connect
-
Is this just a basic HTML website? It sounds like you just have a hung service.
-
@DustinB3403 said:
Is this just a basic HTML website? It sounds like you just have a hung service.
He stated it was an application. First post wasn't that far up.
-
@JaredBusch said:
@DustinB3403 said:
Is this just a basic HTML website? It sounds like you just have a hung service.
He stated it was an application. First post wasn't that far up.
Sorry duh.
-
@Reid-Cooper what application are you running?
-
A 503 means that IIS is responding but that there is an error. Here are the possibilities for the error code: https://technet.microsoft.com/en-us/library/cc781893(v=ws.10).aspx
Because a 503 and not a "Page Cannot Be Displayed" error is what is coming through, it sounds like we are past the Firewall point and are dealing with something wrong with IIS configuration not Firewall. This implies (I think) that port 80 is making it through end to end to deliver the error code.
-
@DustinB3403 said:
Is this just a basic HTML website? It sounds like you just have a hung service.
-
@DustinB3403 said:
@Reid-Cooper what application are you running?
It's a small semi-custom thing that we have run for years but is being moved to a new server.
-
@Reid-Cooper said:
@DustinB3403 said:
Is this just a basic HTML website? It sounds like you just have a hung service.
Are you certain there are no logs?
By default all sites should log here:%SystemDrive%\inetpub\logs\LogFiles -
@Reid-Cooper said:
Wait 2.0? Did you properly configure the pool? Gimme a minute and I can log into a Server 2012 R2 with IIS running.
-
@JaredBusch said:
@Reid-Cooper said:
Wait 2.0? Did you properly configure the pool? Gimme a minute and I can log into a Server 2012 R2 with IIS running.
This is the application pool. You may also need to select classic pipeline mode.
-
@JaredBusch said:
Are you certain there are no logs?
No, only certain that I didn't find anything logged
I'll check again. -
@JaredBusch said:
@Reid-Cooper said:
Wait 2.0? Did you properly configure the pool? Gimme a minute and I can log into a Server 2012 R2 with IIS running.
Yes, very old. And I "did" have it configured properly, it was running fine before the reboot. So at least at some point it was working as it should.
-
@JaredBusch ah ha, there we go! The 2.0 pool had "stopped" for some reason. I started it and the site came up. Thanks!
-
There were two application pools, one for 2.0 Integrated that was running, and one for 2.0 Classic which had stopped. Classic was the one that was needed.
-
@Reid-Cooper said:
There were two application pools, one for 2.0 Integrated that was running, and one for 2.0 Classic which had stopped. Classic was the one that was needed.
If you click on Basic Settings for your application it tells you which pool it is using.
-
Well I thought that we were good. I started the pool and the site came up. Went to refresh the page and it is down again with the same 503 error again.
-
Here is the error that I get...
-
That is the error that I get if I attempt to recycle the 2.0 Classic Pool.
-
Okay I have no experience with this but Googling around I found someone suggesting that you just make a new pool and move the application to that. Maybe that would work.
-
@scottalanmiller said:
Okay I have no experience with this but Googling around I found someone suggesting that you just make a new pool and move the application to that. Maybe that would work.
Tried that. For the moment, it came back up. Fingers crossed.
