My trials of installing FreePBX

Dashrender

OK weird - i'm still getting the same error as listed above, but what's even weirder is that the time hasn't changed. I've installed the two update from yum and there were 3 modules in FreePBX that needed updating, did that (also reinstalled CID - removed it earlier to solve the asterisk problem)

Will the error report continue to show me errors even if they are cleared? Do I just have to click the Ignore this button?

Also, under summary near the top of the page, Asterisk has a yellow triangle with an explanation mark in it, but when I hover over it, it says Asterisk has been up for less than 10 mins, and then lists how long it's actually been up - is this an issue?

Dashrender

While I wait for a few answer about that I'm moving on.

I've created a user with an extension - easy enough.... but when I try to connect a Zioper softphone to it using username = ext, password (created by FPBX - really long) Domain = IP of FPBX

I won't connect - We are sorry, we are unable to connect to your PBX with the information you provided.

scottalanmiller

Check the firewall.

scottalanmiller

Use netstat -tulpn to see what is listening.

Dashrender

[root@c1115759-27921 ~]# netstat -tulpn
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1418/sshd
tcp 0 0 0.0.0.0:8088 0.0.0.0:* LISTEN 2548/asterisk
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1683/sendmail
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 1564/mysqld
tcp 0 0 0.0.0.0:5038 0.0.0.0:* LISTEN 2548/asterisk
tcp 0 0 :::22 :::* LISTEN 1418/sshd
tcp 0 0 :::80 :::* LISTEN 1733/httpd
udp 0 0 0.0.0.0:5060 0.0.0.0:* 2548/asterisk
udp 0 0 0.0.0.0:5061 0.0.0.0:* 2548/asterisk
udp 0 0 0.0.0.0:4569 0.0.0.0:* 2548/asterisk
udp 0 0 0.0.0.0:51326 0.0.0.0:* 2548/asterisk

My iptables

*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -m state --state NEW -p tcp --dport 80 -j ACCEPT
-A INPUT -m state --state NEW -p tcp --dport 443 -j ACCEPT
-A INPUT -p udp -m udp --dport 5060 -j ACCEPT
-A INPUT -p udp -m udp --dport 4569 -j ACCEPT
-A INPUT -p udp -m udp --dport 5036 -j ACCEPT
-A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT

Dashrender

Not having any luck getting my extensions to connect I've decided to start over and document even better this time.

Again starting with a C@C Dev3 CentOS 6.5 box.

Following http://wiki.freepbx.org/display/HTGS/Installing+FreePBX+12+on+CentOS+6.5

Time to disable selinux
sed -i 's/(^SELINUX=)./\SELINUX=disabled/' /etc/sysconfig/selinux*

reboot and check status with sestatus which shows

SELinux status:                 enabled
SELinuxfs mount:                /selinux
Current mode:                   enforcing
Mode from config file:          enforcing
Policy version:                 24
Policy from config file:        targeted

Uh - Houston, we have a problem. Let's look at /etc/sysconfig/selinux

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
#     targeted - Targeted processes are protected,
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted </code></pre>

OK this matches the instructions, but isn't working. Google tells me that I need to change a different file to disable selinux. http://www.shayanderson.com/linux/disable-selinux-on-centos-6.htm

This page tells me I need to change SELINUX=disabled in /etc/selinux/config
They also mention using getenforce as well as sestatus to check the status of selinux.

Success! Upon rebooting after changing /etc/selinux/config I see

SELinux status:                 disabled

Time to update the system

yum -y update
yum groupinstall core
yum groupinstall base

I'll be back in an hour or so after this is done.

Dashrender

Interrupted by the day job.

OK updates installed.. now to install some additional packages.

yum install gcc gcc-c++ lynx bison mysql-devel mysql-server php php-mysql php-pear php-mbstring tftp-server httpd make ncurses-devel libtermcap-devel sendmail sendmail-cf caching-nameserver sox newt-devel libxml2-devel libtiff-devel audiofile-devel gtk2-devel subversion kernel-devel git subversion kernel-devel php-process crontabs cronie cronie-anacron wget vim php-xml uuid-devel libtool sqlite-devel

scottalanmiller

Why are you installing a compiler? What are you going to compile?

Dashrender

Because the instructions tell me to...

There are several make commands in these setup instructions... is that compiling?

Dashrender

Check the status of iptables and disable them for now to make setup easier. (not my idea, the instructions idea).

chkconfig iptables --list
iptables 0:off 1:off 2:off 3:off 4:off 5:off 6:off

It was already off (seems odd, but must be the default for C@C)

SQL setup time

chkconfig --level 345 mysqld on
service mysqld start

Output

Initializing MySQL database:  WARNING: The host 'c1107372-7807.cloudatcost.com' could not be looked up with resolveip.
This probably means that your libc libraries are not 100 % compatible
with this binary MySQL version. The MySQL daemon, mysqld, should work
normally with the exception that host name resolving will not work.
This means that you should use IP addresses instead of hostnames
when specifying MySQL privileges !
Installing MySQL system tables...
OK
Filling help tables...
OK

To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:

/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h c1107372-7807.cloudatcost.com password 'new-password'

Alternatively you can run:
/usr/bin/mysql_secure_installation

which will also give you the option of removing the test
databases and anonymous user created by default.  This is
strongly recommended for production servers.

See the manual for more instructions.

You can start the MySQL daemon with:
cd /usr ; /usr/bin/mysqld_safe &

You can test the MySQL daemon with mysql-test-run.pl
cd /usr/mysql-test ; perl mysql-test-run.pl

Please report any problems with the /usr/bin/mysqlbug script!

                                                           [  OK  ]
Starting mysqld:                                           [  OK  ]

scottalanmiller

@Dashrender said:

Because the instructions tell me to...

There are several make commands in these setup instructions... is that compiling?

Make is used for a lot of things. But presumably. This seems fishy, though.

Dashrender

Onto Apache

chkconfig --level 345 httpd on

Output

Starting httpd: httpd: apr_sockaddr_info_get() failed for c1107372-7807.cloudatcost.com
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
                                                           [  OK  ]

Now for PearDB

pear channel-update pear.php.net
pear install db-1.7.14

You may receive a warning:
WARNING: "pear/DB" is deprecated in favor of "pear/MDB2"

Output

[root@c1107372-7807 ~]# pear channel-update pear.php.net
Updating channel "pear.php.net"
Update of Channel "pear.php.net" succeeded
[root@c1107372-7807 ~]# pear install db-1.7.14
WARNING: "pear/DB" is deprecated in favor of "pear/MDB2"
downloading DB-1.7.14.tgz ...
Starting to download DB-1.7.14.tgz (133,103 bytes)
.............................done: 133,103 bytes
install ok: channel://pear.php.net/DB-1.7.14

I did receive the notice about pear being deprecated - shouldn't these instructions be updated to use the current software?

And now a reboot.

scottalanmiller

The package would need to be updated, not just the instructions.

Dashrender

I'm skipping the Google voice stuff - I have an old account, but I don't recall the credentials.

add Asterisk user

adduser asterisk -M -c "Asterisk User"

Download Asterisk

cd /usr/src
wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar.gz
git clone https://github.com/akheron/jansson.git
wget http://www.pjsip.org/release/2.2.1/pjproject-2.2.1.tar.bz2

No problems there

Compile and install DAHDI and LibPRI

cd /usr/src
tar xvfz dahdi-linux-complete-current.tar.gz
tar xvfz libpri-1.4-current.tar.gz
rm -f dahdi-linux-complete-current.tar.gz libpri-1.4-current.tar.gz
cd dahdi-linux-complete-*
make all
make install
make config
cd /usr/src/libpri-1.4.*
make
make install

Dashrender

Compile and install pjproject

cd /usr/src
tar -xjvf pjproject-2.2.1.tar.bz2
cd pjproject-2.2.1
CFLAGS='-DPJ_HAS_IPV6=1' ./configure --prefix=/usr --enable-shared --disable-sound\
  --disable-resample --disable-video --disable-opencore-amr --libdir=/usr/lib64
make dep
make
make install

Compile and install jansson

cd /usr/src/jansson
autoreconf -i
./configure --libdir=/usr/lib64
make
make install

Dashrender

Compile and install Asterisk

cd /usr/src
tar xvfz asterisk-13-current.tar.gz
rm -f asterisk-13-current.tar.gz
cd asterisk-*
contrib/scripts/install_prereq install
./configure --libdir=/usr/lib64
contrib/scripts/get_mp3_source.sh
make menuselect

Now presented with what options I want to install - per the instruction the only thing I add is Format MP3

Click Save and Exit and continue with Asterisk install

make
make install
make config
ldconfig

Dashrender

Took a while but Asterisk is installed.

Installing Asterisk extra sounds

mkdir -p /var/lib/asterisk/sounds
cd /var/lib/asterisk/sounds
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz
tar xfz asterisk-extra-sounds-en-wav-current.tar.gz
rm -f asterisk-extra-sounds-en-wav-current.tar.gz
# Wideband Audio download
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-g722-current.tar.gz
tar xfz asterisk-extra-sounds-en-g722-current.tar.gz
rm -f asterisk-extra-sounds-en-g722-current.tar.gz

Dashrender

Here the second omission in the instructions. They don't tell you to change the directory before downloading FreePBX. I will include it here.

cd /usr/src
wget http://mirror.freepbx.org/freepbx-12.0.3.tgz
tar vxfz freepbx-12.0.3.tgz

Change some permissions

chown asterisk. /var/run/asterisk
chown -R asterisk. /etc/asterisk
chown -R asterisk. /var/{lib,log,spool}/asterisk
chown -R asterisk. /usr/lib/asterisk
chown -R asterisk. /usr/lib64/asterisk
mkdir /var/www/html
chown -R asterisk. /var/www/

Output

# chown asterisk. /var/run/asterisk
# chown -R asterisk. /etc/asterisk
# chown -R asterisk. /var/{lib,log,spool}/asterisk
chown -R asterisk. /usr/lib/asterisk
chown -R asterisk. /usr/lib64/asterisk
mkdir /var/www/html
# chown -R asterisk. /usr/lib/asterisk
chown: cannot access `/usr/lib/asterisk': No such file or directory
# chown -R asterisk. /usr/lib64/asterisk
# mkdir /var/www/html
mkdir: cannot create directory `/var/www/html': File exists
# chown -R asterisk. /var/www/

Odd that there is no /usr/lib/asterisk - so I'll just make a mental note
the /var/www/html directory already exists - so no big deal

Dashrender

A few mods to Apache

sed -i 's/\(^upload_max_filesize = \).*/\120M/' /etc/php.ini
cp /etc/httpd/conf/httpd.conf /etc/httpd/conf/httpd.conf_orig
sed -i 's/^\(User\|Group\).*/\1 asterisk/' /etc/httpd/conf/httpd.conf
service httpd restart

Output
Stopping httpd: [ OK ]
Starting httpd: httpd: apr_sockaddr_info_get() failed for c1115759-27921.cloudatcost.com
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
[ OK ]

I'm going to have to fix apache so it knows it's FQDN

Dashrender

Configure Asterisk database in MYSQL

cd /usr/src/freepbx
export ASTERISK_DB_PW=amp109
mysqladmin -u root create asterisk 
mysqladmin -u root create asteriskcdrdb

And set permissions on dbs

mysql -u root -e "GRANT ALL PRIVILEGES ON asterisk.* TO asteriskuser@localhost IDENTIFIED BY '${ASTERISK_DB_PW}';"
mysql -u root -e "GRANT ALL PRIVILEGES ON asteriskcdrdb.* TO asteriskuser@localhost IDENTIFIED BY '${ASTERISK_DB_PW}';"
mysql -u root -e "flush privileges;"

Start Asterisk and install FreePBX

cd /usr/src/freepbx
./start_asterisk start
./install_amp --installdb --username=asteriskuser --password=${ASTERISK_DB_PW}

Output

Checking for PEAR DB..OK
Checking for PEAR Console::Getopt..OK
Using username: asteriskuser
Using password: ******
Checking user..OK
Checking if Asterisk is running..running with PID: 11666..OK
Checking for /etc/amportal.conf../etc/amportal.conf does not exist, copying default
Creating new /etc/amportal.conf
Enter your USERNAME to connect to the 'asterisk' database:
 [asteriskuser]
Enter your PASSWORD to connect to the 'asterisk' database:
 [amp109]
Enter the hostname of the 'asterisk' database:
 [localhost]
Enter a USERNAME to connect to the Asterisk Manager interface:
 [admin]
Enter a PASSWORD to connect to the Asterisk Manager interface:
 [amp111]
Enter the path to use for your AMP web root:
 [/var/www/html]

PHP Warning:  mkdir(): File exists in /usr/src/freepbx/libfreepbx.install.php on line 197
[FATAL] Cannot create /var/www/html!

Pressing on (the following commands failed because FreePBX didn't do something right (only error noted above - according the instructions on FreePBX.org you can simply re run the install -
./install_amp --installdb --username=asteriskuser --password=${ASTERISK_DB_PW})

amportal chown
amportal a ma installall
amportal a reload
amportal a ma refreshsignatures
amportal chown

And now the system doesn't know amportal command

OK I ran the ./install_amp command again and now amportal commands are working.

Another mod for FreePBX, then we can start it

ln -s /var/lib/asterisk/moh /var/lib/asterisk/mohmp3
amportal restart

Add the Commercial Modules repos

cd /usr/src
wget -P /etc/yum.repos.d/ -N http://yum.schmoozecom.net/schmooze-commercial/schmooze-commercial.repo
yum clean all
yum -y install php-5.3-zend-guard-loader sysadmin fail2ban incron ImageMagick
service httpd restart
amportal a ma download sysadmin
amportal a ma install sysadmin